PWPSB1102 - Soundbar Pyle - Free user manual and instructions
Find the device manual for free PWPSB1102 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Soundbar |
| Brand | Pyle |
| Model | PWPSB1102 |
| Dimensions (W x H x D) | 30 x 3 x 2 inches |
| Weight | 3.5 lbs |
| Power Output | 30W RMS |
| Frequency Response | 20Hz - 20kHz |
| Connectivity | Bluetooth 5.0, AUX (3.5mm), USB, Optical |
| Audio Formats Supported | MP3, WMA, WAV, FLAC (via USB) |
| Controls | Volume, Source, Power buttons; Remote included |
| Drivers | 2 x 3-inch full-range speakers |
| Subwoofer | Built-in (passive radiator) |
| Wall Mountable | Yes, with keyhole slots |
| Color | Black |
| Power Supply | AC 100-240V, 50/60Hz; DC adapter included |
| Included Accessories | Remote control, AUX cable, power adapter, wall mount brackets |
| Safety | Do not expose to water or moisture; avoid high volume for prolonged periods |
| Maintenance | Wipe with a dry, soft cloth; avoid solvents |
| Spare Parts & Repairability | No user-serviceable parts; contact Pyle support for repairs |
| Bluetooth Range | Up to 33 feet (10 meters) |
Frequently Asked Questions - PWPSB1102 Pyle
How do I pair my Pyle PWPSB1102 soundbar via Bluetooth?
Press the Source button on the soundbar or remote until Bluetooth mode is selected. The LED will blink. On your device, enable Bluetooth and select PWPSB1102 from the list. If prompted, enter 0000 as the PIN. The LED will turn solid when connected.
How do I connect the soundbar to my TV?
You can connect using an AUX cable (3.5mm to 3.5mm) or an Optical cable (Toslink). Use the AUX or Optical input on the soundbar and select the corresponding source on the soundbar or remote. For TV, set the audio output to PCM or Stereo.
My soundbar is not producing any sound. What should I do?
First, ensure the soundbar is powered on and the volume is not muted. Check the source selection (Bluetooth, AUX, Optical). If using Bluetooth, confirm the device is connected. Try a different cable or source. Reset the soundbar by holding the Power button for 5 seconds.
The remote control is not working. How can I fix it?
Replace the CR2032 battery in the remote. Ensure there is a clear line of sight to the soundbar's infrared receiver. If still not working, try using the buttons on the soundbar itself. If the remote is damaged, contact Pyle for a replacement.
How do I reset the Pyle PWPSB1102 soundbar to factory settings?
Press and hold the Power button for approximately 5 seconds while the soundbar is on. The unit will power off and reset to default settings. Alternatively, disconnect the power adapter for 1 minute.
Can I mount the soundbar on the wall?
Yes, the soundbar has keyhole slots on the back. Use the included wall mount brackets and screws. Ensure the wall can support the weight (3.5 lbs). Consult the manual for detailed mounting instructions.
Can I use the soundbar with an optical connection?
Yes, the soundbar has an Optical (Toslink) input. Connect the optical cable from your TV or other device to the soundbar. Select Optical as the source. Ensure the source device outputs PCM audio format.
What audio formats are supported via USB?
The USB port supports playback of MP3, WMA, WAV, and FLAC files. The USB drive should be formatted as FAT32. Maximum storage capacity is 32GB.
What are the power specifications of the soundbar?
The soundbar operates on AC 100-240V, 50/60Hz, with an external power adapter (DC output). The power consumption is approximately 30W during use. Standby power consumption is less than 0.5W.
What is included in the box with the PWPSB1102?
The box includes: Pyle PWPSB1102 Soundbar, Remote Control (with battery), AUX Cable (3.5mm), Optical Cable, Power Adapter, Wall Mount Brackets with screws, and User Manual.
User questions about PWPSB1102 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Soundbar in PDF format for free! Find your manual PWPSB1102 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PWPSB1102 by Pyle.
USER MANUAL PWPSB1102 Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PWPSB1102
Category : Soundbar