PATVSB2600 - Soundbar Pyle - Free user manual and instructions
Find the device manual for free PATVSB2600 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Soundbar |
| Model | PATVSB2600 |
| Brand | Pyle |
| Dimensions (W x H x D) | 36 x 2.5 x 3 inches |
| Weight | 5 lbs |
| Power Supply | AC 100-240V, 50/60Hz |
| Bluetooth Version | 4.0 |
| Audio Inputs | Optical (Toslink), 3.5mm AUX, RCA |
| Output Power | 40W RMS |
| Frequency Response | 20Hz - 20kHz |
| Driver Size | 2 x 3-inch full-range drivers |
| Remote Control | Included (battery CR2032) |
| Mounting Options | Wall-mountable (brackets included) |
| Compatibility | TVs, smartphones, tablets, computers |
| Cleaning Instructions | Wipe with a dry, soft cloth. Do not use liquids. |
| Safety Features | Overload protection, fire-resistant casing |
| Spare Parts Availability | Remote control, power adapter available from Pyle |
| Warranty | 1 year limited warranty |
| Energy Consumption | 30W max |
Frequently Asked Questions - PATVSB2600 Pyle
How do I connect the soundbar to my TV via Bluetooth?
Turn on the soundbar and set it to Bluetooth mode using the source button. On your TV, enable Bluetooth and search for 'PATVSB2600'. Select it to pair. If prompted, enter PIN 0000.
Can I use the soundbar with a PC or smartphone?
Yes, you can connect via Bluetooth or using the 3.5mm AUX cable (included). For PC, also use the optical cable if available.
What do I do if there is no sound from the soundbar?
Check that the soundbar is powered on and the volume is not muted. Ensure the correct input source is selected. For optical connection, verify TV audio output is set to PCM.
How do I mount the soundbar on the wall?
Use the included wall-mount brackets and screws. Mark the wall at the desired height, drill holes, insert anchors, and screw the brackets. Then slide the soundbar onto the brackets until it clicks.
Does the remote control require batteries?
Yes, the remote uses one CR2032 coin cell battery. A battery is included but may need to be replaced after extended use.
Can I connect the soundbar to a non-Bluetooth TV?
Yes, use the optical cable or AUX cable. If your TV has only RCA output, use an RCA-to-3.5mm adapter (not included).
How do I reset the soundbar to factory settings?
Press and hold the Volume + and Source buttons simultaneously for 5 seconds until the LED flashes. The soundbar will restart and be reset.
What is the maximum Bluetooth range?
The Bluetooth range is up to 30 feet (10 meters) in open space. Obstacles like walls may reduce range.
Can I use the soundbar with a universal remote?
Yes, the soundbar can be programmed to universal remotes. Use code 123 or search manually. Refer to your universal remote manual for instructions.
How do I clean the soundbar?
Unplug the soundbar. Wipe the surface with a soft, dry cloth. Do not use chemical cleaners or water, as they may damage the casing.
User questions about PATVSB2600 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Soundbar in PDF format for free! Find your manual PATVSB2600 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PATVSB2600 by Pyle.
USER MANUAL PATVSB2600 Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PATVSB2600
Category : Soundbar