PSBVWF300 - Soundbar Pyle - Free user manual and instructions
Find the device manual for free PSBVWF300 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Soundbar |
| Brand | Pyle |
| Model | PSBVWF300 |
| Dimensions (W x H x D) | 36" x 3" x 2.5" (91.4 x 7.6 x 6.4 cm) |
| Weight | 5.5 lbs (2.5 kg) |
| Power Output (RMS) | 100W |
| Impedance | 4 Ohms |
| Frequency Response | 20Hz - 20kHz |
| Driver Size | 2 x 3" full-range drivers |
| Connectivity | Bluetooth 5.0, AUX 3.5mm, USB, Optical, RCA |
| Remote Control | Yes, IR remote included |
| Mounting Options | Wall-mountable with included brackets |
| Power Supply | AC 100-240V, 50/60Hz |
| Material | Plastic housing with metal grille |
| Color | Black |
| Standby Power Consumption | <1W |
| Included Accessories | Remote control, audio cable, power adapter, wall mount kit, user manual |
| Warranty | 1-year limited |
Frequently Asked Questions - PSBVWF300 Pyle
How do I connect my soundbar to my TV?
Use either the optical cable (for digital audio), RCA cable (for analog audio), or AUX 3.5mm cable. Connect one end to the soundbar and the other to the corresponding output on your TV. Then select the correct input source on the soundbar using the remote or buttons.
Why is there no sound from the soundbar?
Ensure the soundbar is powered on and the volume is turned up. Check that the correct input source is selected. Verify the cable connection is secure. Try a different audio source to rule out source issues. If using Bluetooth, ensure pairing is successful.
Can I control the soundbar with my TV remote?
This soundbar does not support HDMI-ARC or CEC, so it cannot be controlled directly by a TV remote. Use the included IR remote or the buttons on the soundbar.
How do I reset the soundbar to factory settings?
Press and hold the Power button for about 10 seconds until the LED flashes. Alternatively, disconnect the power for 30 seconds and reconnect.
What audio input options are available?
The soundbar supports Bluetooth 5.0, AUX 3.5mm, USB (for audio playback from USB drives), Optical, and RCA inputs.
Can I mount the soundbar on the wall?
Yes, the soundbar is wall-mountable. Use the included wall mount kit and brackets. Ensure the wall can support the weight (5.5 lbs). Follow the instructions in the manual for proper mounting.
How do I pair my smartphone via Bluetooth?
Turn on the soundbar and press the Bluetooth button on the remote or soundbar to enter pairing mode (LED blinks blue). On your phone, enable Bluetooth and select 'Pyle PSBVWF300' from the list. Once connected, the LED becomes solid blue.
The remote control isn't working. What should I do?
First, replace the batteries with new ones (CR2025 or similar). Make sure there are no obstructions between the remote and the soundbar's IR sensor. If it still doesn't work, try resetting the soundbar (press and hold Power button for 10 seconds). Contact support if the issue persists.
What is the power consumption of the soundbar?
The soundbar operates on AC 100-240V and consumes up to 100W during use. In standby mode, it consumes less than 1W.
How do I clean and maintain the soundbar?
Unplug the soundbar before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use any liquids, solvents, or abrasive cleaners. Avoid getting moisture into the openings. For the grille, gently vacuum with a soft brush attachment.
User questions about PSBVWF300 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Soundbar in PDF format for free! Find your manual PSBVWF300 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PSBVWF300 by Pyle.
USER MANUAL PSBVWF300 Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PSBVWF300
Category : Soundbar