SAROS ICT5T-12 - Loudspeaker Crestron - Free user manual and instructions
Find the device manual for free SAROS ICT5T-12 Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-ceiling loudspeaker |
| Model | SAROS ICT5T-12 |
| Brand | Crestron |
| Driver Size | 5.25 inches (woofer) + 1 inch (tweeter) |
| Frequency Response | 60 Hz – 20 kHz |
| Power Handling (RMS) | 40 watts |
| Impedance | 8 ohms |
| Transformer Taps | 70V/100V: 5W, 10W, 20W, 40W; 8Ω direct |
| Dimensions (Cutout) | 7.5 inches diameter |
| Dimensions (Overall) | 8.8 inches diameter x 4.5 inches depth |
| Weight | 3.5 lbs (1.6 kg) |
| Mounting | Spring-loaded dog-ear clamps |
| Ceiling Thickness Range | 0.5 to 1.5 inches |
| Grille Material | Magnetic, paintable metal |
| Input Connection | Screw terminals |
| Certifications | UL 1480, UL 2043 (plenum rated) |
| Cleaning | Wipe with dry cloth; do not use water or solvents |
| Safety | Disconnect power before installation; use proper support |
| Repairability | Contact Crestron for service; not user serviceable |
| Warranty | 5 years limited |
Frequently Asked Questions - SAROS ICT5T-12 Crestron
What tools are needed for installation?
Basic tools include a drywall saw, screwdriver, wire strippers, and a template (provided). Use a stud finder to avoid obstructions.
Can this speaker be used outdoors?
No, the SAROS ICT5T-12 is designed for indoor plenum-rated ceiling installation only. Do not expose to moisture.
How do I connect the transformer taps for 70V systems?
Rotate the tap selector switch on the speaker to the desired wattage (5W, 10W, 20W, 40W). For 8Ω operation, set to '8Ω' position.
What is the maximum ceiling thickness?
The dog-ear clamps accommodate ceiling thicknesses from 0.5 to 1.5 inches. Ensure the ceiling tile or drywall is solid.
Is the grille paintable?
Yes, the metal grille is paintable. Remove grille, apply paint with a brush or spray, let dry, then reattach.
How do I route the speaker wire?
Use 18AWG or lower gauge wire. Pass wire through the backcan's knockout hole and connect to the spring-loaded terminals. Leave extra slack for service.
What is the recommended amplifier power?
For optimal performance, use an amplifier delivering 20-80 watts RMS per channel at 8Ω. When using 70V taps, ensure amplifier has 70V output.
Can the speaker be installed in a bathroom?
This model is not rated for high humidity. For bathrooms, use a speaker with suitable IP rating.
How do I clean the speaker?
Wipe the grille and outer surface with a soft, dry cloth. For heavier dust, use a vacuum with brush attachment. Do not use water or cleaning liquids.
What if I hear a buzzing noise?
Check wiring connections for looseness. Ensure the transformer tap is set correctly. Also confirm the amplifier is not overloaded and is properly grounded.
User questions about SAROS ICT5T-12 Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SAROS ICT5T-12 - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SAROS ICT5T-12 by Crestron.
USER MANUAL SAROS ICT5T-12 Crestron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Crestron
Model : SAROS ICT5T-12
Category : Loudspeaker