ULTIMATE IC8-AW-W-T-EACH - Loudspeaker Crestron - Free user manual and instructions
Find the device manual for free ULTIMATE IC8-AW-W-T-EACH Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-ceiling Loudspeaker |
| Brand | Crestron |
| Model | ULTIMATE IC8-AW-W-T-EACH |
| Speaker Type | 2-way, coaxial |
| Woofer Size | 8 inches (203 mm) |
| Tweeter Size | 1 inch (25 mm) soft dome |
| Frequency Response | 45 Hz - 20 kHz |
| Power Handling (RMS) | 60 watts |
| Power Handling (Program) | 120 watts |
| Impedance (Low Impedance) | 8 ohms |
| Transformer Taps (70V/100V) | 60W, 30W, 15W, 7.5W, 3.75W |
| Sensitivity (1W/1m) | 90 dB |
| Coverage Angle (Conical) | 120° |
| Dimensions (Diameter x Depth) | 11.2 x 8.9 inches (285 x 226 mm) |
| Cutout Diameter | 9.75 inches (248 mm) |
| Weight | 8.5 lbs (3.9 kg) |
| Finish | White (paintable grille) |
| Grille Included | Yes, magnetic |
| Installation Type | Ceiling mount with dog legs |
| Weather Rating | IP54 (splash-proof, dust-resistant) |
| Warranty | 5 years limited |
| Certifications | UL 1480, UL 2043, CE |
Frequently Asked Questions - ULTIMATE IC8-AW-W-T-EACH Crestron
How do I install the Crestron ULTIMATE IC8-AW-W-T-EACH?
Cut a 9.75-inch hole in the ceiling, run speaker wire, connect to the spring terminals, and secure with the included dog legs. Use the paint shield for clean installation.
What impedance does this speaker have in low-impedance mode?
In low-impedance mode, the speaker presents an 8 ohm load.
Can the ULTIMATE IC8-AW-W-T-EACH be used outdoors?
Yes, it is rated IP54 for weather resistance, making it suitable for covered outdoor areas like patios.
What transformer taps are available?
The speaker includes a multi-tap transformer for 70V/100V systems: 60W, 30W, 15W, 7.5W, and 3.75W.
Can I paint the grille?
Yes, the grille is paintable. Remove it before painting and use a thin coat to avoid clogging the perforations.
Is this speaker compatible with Crestron amplifiers?
Yes, it is designed for use with Crestron amplifiers and can also be used with any standard amplifier (8 ohm or 70V/100V).
What are the wiring instructions?
Connect the positive and negative wires to the spring terminals: + (red) and - (black). For 70V/100V systems, select the desired tap using the rear switch.
Does the speaker meet fire safety codes?
Yes, it is UL 2043 listed for plenum air spaces, ensuring safety in ceiling installations.
What is the coverage angle of this speaker?
The speaker provides a 120-degree conical coverage, ideal for even sound distribution.
How do I connect the speaker to a 70V system?
Set the transformer tap switch to the desired wattage (e.g., 30W). Connect the amplifier's 70V output to the speaker's input terminals. Ensure total tap watts do not exceed amplifier power.
User questions about ULTIMATE IC8-AW-W-T-EACH Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual ULTIMATE IC8-AW-W-T-EACH - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ULTIMATE IC8-AW-W-T-EACH by Crestron.
USER MANUAL ULTIMATE IC8-AW-W-T-EACH Crestron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Crestron
Model : ULTIMATE IC8-AW-W-T-EACH
Category : Loudspeaker