SAROS IC4T-W - Loudspeaker Crestron - Free user manual and instructions
Find the device manual for free SAROS IC4T-W Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-ceiling Loudspeaker |
| Brand | Crestron |
| Model | SAROS IC4T-W |
| Driver Configuration | 2-way (4" woofer, 1" tweeter) |
| Frequency Response | 75 Hz – 20 kHz |
| Sensitivity | 88 dB (1W/1m) |
| Impedance | 8 ohms (bypass transformer) |
| Transformer Taps | 70V: 1.5, 3, 6, 12, 24W; 100V: 3, 6, 12, 24W |
| Power Handling (RMS) | 40 W |
| Dimensions (H × Dia.) | 4.0 × 8.5 in (102 × 216 mm) |
| Cutout Diameter | 7.5 in (191 mm) |
| Weight | 3.5 lb (1.6 kg) |
| Material | Injection-molded baffle, metal grille |
| Mounting | Spring-loaded clamps, ceiling thickness up to 1.5 in |
| Terminal Type | Screw terminals, 4-position |
| Color | White (paintable grille) |
| Application | Background music, paging, distributed audio |
| Compliance | UL 2043 (plenum rated) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Cleaning Instructions | Wipe with dry, soft cloth; do not use solvents |
| Safety Notes | Disconnect power before installation; avoid exposure to moisture |
| Spare Parts Availability | Contact Crestron dealer for grille, transformer replacement |
Frequently Asked Questions - SAROS IC4T-W Crestron
What is the cutout size for the SAROS IC4T-W?
The required cutout diameter is 7.5 inches (191 mm). Ensure ceiling thickness does not exceed 1.5 inches.
How do I set the power tap on the transformer?
The speaker has a multi-tap transformer for 70V/100V systems. Rotate the tap selector switch to choose between 1.5, 3, 6, 12, or 24W (70V) or 3, 6, 12, 24W (100V). For 8-ohm operation, use the bypass position.
Can I paint the grille?
Yes, the grille is paintable. Use a thin coat of latex paint; do not clog the perforations. Allow paint to dry completely before installation.
What is the frequency response of this speaker?
The frequency response is 75 Hz – 20 kHz at -10 dB reference. It provides clear mids and highs with adequate bass for background music.
Is the SAROS IC4T-W plenum rated?
Yes, it is UL 2043 plenum rated, making it suitable for installation in air handling spaces (ceiling plenums).
How do I wire multiple speakers in a 70V system?
Connect speakers in parallel. Ensure total wattage does not exceed amplifier capacity. Use the appropriate tap setting for each speaker to achieve desired volume levels.
What is the sensitivity rating?
Sensitivity is 88 dB (1W/1m). This indicates moderate efficiency; higher taps will produce louder output.
Can I use this speaker with a standard home amplifier?
Yes, set the tap selector to 8-ohm bypass. The speaker is then an 8-ohm load, compatible with most home amplifiers. Power handling is 40W RMS.
How do I clean the speaker?
Wipe the grille and baffle with a dry, soft cloth. Do not use water, solvents, or abrasive cleaners as they may damage the finish or components.
What is the warranty for Crestron SAROS IC4T-W?
Crestron offers a limited lifetime warranty for the original purchaser. Contact your dealer or Crestron support for details and claims.
User questions about SAROS IC4T-W Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SAROS IC4T-W - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SAROS IC4T-W by Crestron.
USER MANUAL SAROS IC4T-W Crestron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Crestron
Model : SAROS IC4T-W
Category : Loudspeaker