C24ET10-PS - Steam cleaner Vulcan - Free user manual and instructions
Find the device manual for free C24ET10-PS Vulcan in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Steam Cleaner |
| Brand | Vulcan |
| Model | C24ET10-PS |
| Energy Source | Electric (corded) |
| Voltage | 220-240V ~50/60Hz |
| Power | 1500W |
| Water Tank Capacity | 1.2 L |
| Heat-up Time | 3-4 minutes |
| Maximum Steam Pressure | 3.5 bar |
| Steam Flow Rate | 35 g/min |
| Continuous Steam Time | Up to 30 minutes |
| Dimensions (HxWxD) | 30 x 20 x 20 cm |
| Weight | 3.5 kg |
| Cable Length | 4 m |
| Water Level Indicator | Yes |
| Safety Features | Auto shut-off, pressure relief valve |
| Included Accessories | Extension hose, floor mop, brush set, measuring cup |
| Maintenance | Descale regularly using vinegar or descaling solution |
| Spare Parts Available | Replacement brushes, hose, seal kit |
| Repair | User-serviceable parts: nozzle, brush; professional repair for electrical issues |
Frequently Asked Questions - C24ET10-PS Vulcan
How do I descale my steam cleaner?
To descale, fill the tank with a mixture of vinegar and water (1:1) or use a descaling solution. Heat and steam through the system, then rinse with clean water. Repeat every few months to prevent limescale buildup.
Can I use tap water in the steam cleaner?
Yes, you can use tap water. However, in hard water areas, using distilled or demineralized water can reduce scaling and prolong the device's life. Avoid adding chemicals or detergents as they may damage the unit.
How long does it take to heat up?
The heat-up time is approximately 3-4 minutes. You'll know it's ready when the ready indicator lights up or steam starts to emit from the nozzle.
What accessories are included?
The package includes an extension hose, floor mop, brush set (small and large brushes), and a measuring cup. Additional accessories can be purchased separately.
Can I use it on upholstery?
Yes, you can use the steam cleaner on upholstery such as sofas, curtains, and mattresses. First, test on a hidden area and use the fabric brush attachment. Avoid over-wetting by using short bursts of steam.
How do I store the steam cleaner?
After use, empty the water tank, allow the device to cool down, and store it in a dry place. Wrap the power cord neatly and keep attachments in a dedicated box or bag to avoid damage.
Why is steam not coming out?
If no steam is produced, check that the water tank is filled, the power switch is on, and the device has heated up completely. Also, inspect the nozzle for blockages. If the problem persists, refer to the troubleshooting section in the manual.
Is it safe for hardwood floors?
Steam cleaners can be used on sealed hardwood floors, but keep the steam moving and don't let it sit in one spot. Use the floor mop attachment and avoid excessive moisture. For unsealed wood, use a damp cloth instead.
How do I clean the nozzle?
To clean the nozzle, detach it after the device has cooled, and rinse with warm water. Use a small brush to remove any debris or mineral deposits. Reattach securely before next use.
What is the warranty?
The warranty details are provided in the user manual or on the manufacturer's website. Typically, there is a 1-2 year warranty against manufacturing defects. Contact Vulcan customer support for specific information.
User questions about C24ET10-PS Vulcan
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Steam cleaner in PDF format for free! Find your manual C24ET10-PS - Vulcan and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. C24ET10-PS by Vulcan.
USER MANUAL C24ET10-PS Vulcan
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vulcan
Model : C24ET10-PS
Category : Steam cleaner