E1655W-A - Projector ASK PROXIMA - Free user manual and instructions
Find the device manual for free E1655W-A ASK PROXIMA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Projector |
| Model | E1655W-A |
| Brand | ASK Proxima |
| Display Technology | DLP |
| Native Resolution | WXGA (1280 x 800) |
| Brightness | 3500 ANSI Lumens |
| Contrast Ratio | 2000:1 |
| Lamp Type | P-VIP 230W |
| Lamp Life (Normal) | 3000 hours |
| Lamp Life (Eco) | 4000 hours |
| Zoom Ratio | 1.2x manual |
| Keystone Correction | Vertical +/- 30 degrees |
| Input Ports | VGA, HDMI, S-Video, Composite, Audio 3.5mm |
| Output Ports | VGA Monitor Out, Audio 3.5mm, RS-232 |
| Dimensions (W x D x H) | 330 x 250 x 100 mm |
| Weight | 3.5 kg |
| Power Consumption | 300W (maximum), <1W (standby) |
| Power Supply | 100-240V AC, 50-60Hz |
| Noise Level (Normal) | 35 dB |
| Noise Level (Eco) | 30 dB |
| Cleaning Instructions | Clean the lens with a soft cloth; clean air filter every 100 hours |
| Safety Features | Kensington lock; overheat protection |
| Spare Parts Available | Replacement lamp, air filter, remote control |
| Repairability | User-replaceable lamp and filter; other repairs by authorized service |
| General Information | Designed for business and education use; supports 3D via DLP Link |
Frequently Asked Questions - E1655W-A ASK PROXIMA
How do I replace the lamp on my ASK Proxima E1655W-A?
Turn off the projector and unplug it. Allow the lamp to cool for at least 30 minutes. Remove the lamp cover screw, slide off the cover, unscrew the lamp module, and pull it out by its handle. Insert the new lamp, secure screws, replace cover, and reset the lamp counter via the menu.
What is the native resolution of this projector?
The native resolution is WXGA (1280 x 800), suitable for widescreen presentations.
How do I clean the air filter?
The air filter should be cleaned every 100 hours. Turn off and unplug the projector. Locate the filter cover on the side, remove it, and gently vacuum or wash the filter with mild soapy water. Dry completely before reinserting.
Can I connect my laptop to this projector?
Yes, you can connect via the VGA (D-Sub) port using a standard VGA cable, or via the HDMI port for digital video and audio.
Why is the projector not turning on?
Check if the power cable is properly plugged in and the main power switch is on. Ensure the lamp cover is fully closed and the lamp timer has not expired (reset if needed). If the LED indicator flashes, refer to the manual for error codes.
How do I adjust the image size?
Use the zoom ring on the lens to adjust the image size. For fine tuning, move the projector closer or farther from the screen. Keystone correction under the menu can correct trapezoidal distortion.
What is the lamp life and how to extend it?
The lamp life is approximately 3000 hours in normal mode and 4000 hours in eco mode. To extend lamp life, use eco mode when possible and ensure proper ventilation.
Does the projector support 3D?
Yes, it supports DLP Link 3D. You need compatible active shutter glasses and a 3D source. Enable 3D in the menu.
How do I reset the lamp timer after replacement?
After replacing the lamp, go to the menu > Settings > Lamp Setting > Lamp Hour Reset. Press and hold the 'Enter' or 'OK' button for a few seconds until the counter resets.
What should I do if the image is blurry?
Rotate the focus ring on the lens until the image is sharp. Also check that the projector is at the correct distance from the screen and the lens is clean.
User questions about E1655W-A ASK PROXIMA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual E1655W-A - ASK PROXIMA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E1655W-A by ASK PROXIMA.