i200 Gen II - Water heater Intellihot - Free user manual and instructions
Find the device manual for free i200 Gen II Intellihot in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tankless Water Heater |
| Model | i200 Gen II |
| Brand | Intellihot |
| Energy Source | Natural Gas or Propane |
| Input Rating | 199,000 BTU/h |
| Efficiency (UEF) | Up to 0.96 |
| Dimensions (H x W x D) | 30 x 18 x 28 inches |
| Weight | 100 lbs |
| Water Connections | 3/4" NPT |
| Venting Type | PVC or CPVC |
| Warranty (Heat Exchanger) | 15 years |
| Control System | Digital with remote monitoring |
| Safety Features | Overheat protection, freeze protection, flame sensing |
| Installation Location | Indoor or outdoor with proper venting |
| Maintenance Requirement | Annual descaling recommended |
| Spare Parts Availability | Through Intellihot authorized dealers |
Frequently Asked Questions - i200 Gen II Intellihot
What is the recommended gas pressure for the i200 Gen II?
The i200 Gen II requires a minimum gas supply pressure of 4.5 inches WC for natural gas and 11 inches WC for propane. Refer to the manual for exact specifications.
How often should I descale the i200 Gen II?
It is recommended to descale the unit annually or more frequently in hard water areas to prevent lime buildup and maintain efficiency.
What does error code E01 mean on the display?
Error code E01 indicates a flame failure. Check gas supply, ignition components, and venting. Reset the unit after troubleshooting.
Can the i200 Gen II be installed outdoors?
Yes, but it requires proper weatherproof venting and protection from direct rain. Follow local codes and the installation manual.
What is the maximum flow rate of the i200 Gen II?
At a 77°F temperature rise, the maximum flow rate is approximately 4.5 GPM. Actual flow depends on inlet water temperature.
How do I troubleshoot no hot water issue?
First, check that the gas supply is on and the unit has power. Verify no error codes. If the problem persists, inspect the water filter and venting.
What type of venting can be used?
The i200 Gen II uses PVC or CPVC venting. Do not use metal venting. Ensure proper slope and length as per manual.
Is the heat exchanger covered under warranty?
Yes, the heat exchanger has a 15-year warranty. Registration may be required. Other parts have shorter warranties.
Can I connect the unit to a recirculation system?
Yes, the i200 Gen II supports internal or external recirculation with a pump. Consult manual for wiring and settings.
What is the recommended annual maintenance besides descaling?
Check and clean the air intake filter, inspect venting for obstructions, and verify gas connections for leaks. Test safety features.
User questions about i200 Gen II Intellihot
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual i200 Gen II - Intellihot and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. i200 Gen II by Intellihot.
USER MANUAL i200 Gen II Intellihot
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Intellihot
Model : i200 Gen II
Category : Water heater