BSVOG 180 - Air conditioner BEKO - Free user manual and instructions
Find the device manual for free BSVOG 180 BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Brand | Beko |
| Model | BSVOG 180 |
| Cooling Capacity | 12000 BTU/h |
| Heating Capacity | Not applicable (cooling-only model) |
| Dehumidification | Yes, up to 1.5 L/h |
| Fan Speeds | 3 (Low, Medium, High) |
| Airflow Rate | 400 m³/h |
| Noise Level | 52 dB(A) (max) |
| Energy Efficiency Ratio (EER) | 2.6 (W/W) |
| Power Supply | 220-240 V ~ 50 Hz |
| Power Consumption (Cooling) | 1100 W |
| Refrigerant | R290 (Propane) |
| Dimensions (W x D x H) | 350 x 450 x 700 mm |
| Net Weight | 28 kg |
| Exhaust Hose Length | 1.5 m |
| Remote Control | Included (battery not included) |
| Timer | 24-hour on/off timer |
| Self-Evaporation | Yes (for dehumidification) |
| Filter Type | Washable foam filter |
| Filter Cleaning Interval | Every 2 weeks |
| Drainage | Continuous or bucket (manual drainage) |
| Safety Features | Overheat protection, auto restart, child lock |
Frequently Asked Questions - BSVOG 180 BEKO
How do I clean the air filter?
Turn off and unplug the unit. Remove the filter cover, take out the foam filter, and wash it with lukewarm water and mild detergent. Let it dry completely before reinstalling.
Why is my air conditioner not cooling?
Check if the filter is dirty, the exhaust hose is properly vented, or the room size exceeds capacity. Also ensure the set temperature is lower than room temperature.
How often should I empty the water tank?
In high humidity, the internal tank may fill quickly. The unit has a continuous drain option; otherwise, empty the tank when the 'full' indicator lights up.
Can I use the air conditioner without the exhaust hose?
No, the exhaust hose must be vented outside to expel hot air. Using it without the hose will cause poor cooling and possible damage.
What does the 'E1' error code mean?
E1 indicates a room temperature sensor fault. Turn off the unit, unplug it, wait 10 minutes, and restart. If it persists, contact service.
How do I set the timer?
Press the Timer button on the remote or control panel. Use the +/- buttons to set hours (1-24). Press Timer again to confirm.
Is the refrigerant R290 safe?
R290 (propane) is flammable. The unit is designed with safety measures. Do not pierce the cooling circuit and ensure proper ventilation during installation.
How do I switch between cooling and fan mode?
Press the Mode button to cycle through Cool, Dry (dehumidify), and Fan modes. The display shows the selected mode.
What type of batteries does the remote need?
The remote uses two AAA batteries (1.5V). Replace them when the remote stops working or range decreases.
Why is water leaking from the back?
During dehumidification, water collects. If the bucket is full, empty it. Also check the drain plug for proper sealing. Continuous drainage hose may be blocked.
User questions about BSVOG 180 BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual BSVOG 180 - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BSVOG 180 by BEKO.
USER MANUAL BSVOG 180 BEKO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEKO
Model : BSVOG 180
Category : Air conditioner