BSEOG 180 - Air conditioner BEKO - Free user manual and instructions
Find the device manual for free BSEOG 180 BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Brand | Beko |
| Model | BSEOG 180 |
| Dimensions (W x D x H) | 32 x 28 x 65 cm |
| Net Weight | 18 kg |
| Power Supply | 220-240 V, 50 Hz |
| Cooling Capacity | 9000 BTU/h |
| Heating Capacity | Not applicable (cooling only) |
| Energy Efficiency Class | A |
| Airflow Rate (max) | 300 m³/h |
| Noise Level (max) | 52 dB(A) |
| Refrigerant Type | R32 |
| Timer Function | Yes, up to 24 hours |
| Remote Control | Included |
| Filters | Washable dust filter |
| Drainage Type | Self-evaporating (no bucket required) |
| Warranty | 2 years |
Frequently Asked Questions - BSEOG 180 BEKO
How do I install the Beko BSEOG 180 air conditioner?
Place the unit near a window or sliding door. Attach the exhaust hose to the back of the unit and connect the window kit to the hose. Adjust the window kit to fit your window opening. Ensure the unit is on a level surface. Plug into a grounded outlet. For detailed steps, refer to the installation guide in your manual.
What is the cooling capacity of the BSEOG 180?
The cooling capacity is 9000 BTU/h, suitable for rooms up to approximately 25 square meters.
How do I clean the air filter?
Turn off and unplug the unit. Remove the filter cover on the back, take out the filter. Wash it with lukewarm water and mild detergent. Let it dry completely before reinstalling. Clean every 2 weeks for optimal performance.
Does this unit have a heating function?
No, the BSEOG 180 is a cooling-only portable air conditioner. It does not provide heating.
Why is water leaking from the unit?
In high humidity, the self-evaporating system may not fully evaporate. If water collects, check the drain plug at the back. Remove it to drain water into a bucket. Ensure the unit is level to prevent leaks.
Can I use an extension cord?
It is not recommended. Use a direct wall outlet that matches the voltage (220-240V). Extension cords may cause voltage drop and overheating.
How do I use the timer function?
Press the Timer button on the remote or control panel. Use +/- to set the desired time (1-24 hours). The unit will turn off after the set time. You can also set it to turn on later.
What should I do if the unit is not cooling?
Check if the filter is clean. Ensure the exhaust hose is not kinked or blocked. Verify the window kit is properly sealed. Also check the set temperature: it should be lower than room temperature.
Is professional installation required?
No, the unit is designed for DIY installation. The window kit and exhaust hose are included. Follow the instructions in the manual. If you're unsure, a handyman can assist.
How do I store the air conditioner for winter?
Clean the filter and unit. Drain any water from the internal tank. Disconnect the hose and accessories. Store in a dry, cool place upright. Cover to protect from dust.
User questions about BSEOG 180 BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual BSEOG 180 - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BSEOG 180 by BEKO.
USER MANUAL BSEOG 180 BEKO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEKO
Model : BSEOG 180
Category : Air conditioner