UDD378S8 - Beer dispenser Avantco - Free user manual and instructions
Find the device manual for free UDD378S8 Avantco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Direct Draw Beer Dispenser |
| Brand | Avantco |
| Model | UDD378S8 |
| Dimensions (W x D x H) | 17" x 24" x 20" (approx.) |
| Weight | 80 lbs (approx.) |
| Power Supply | 115V, 60Hz, 1/4 HP compressor |
| Temperature Range | 34°F to 38°F |
| Refrigerant | R134a |
| Number of Taps | 1 (standard) |
| Keg Capacity | 1/2 barrel (approx. 15.5 gallons) |
| Construction | Stainless steel exterior, plastic interior liner |
| Cooling Type | Forced air circulation |
| Installation | Undercounter or freestanding |
| Cleaning | Daily flush with cleaning solution; weekly sanitization |
| Safety Features | Grounded power cord, temperature controller with cutoff |
| Spare Parts Available | Faucet, coupler, cooling fan, thermostat, door gasket |
| User Manual | 21 pages, PDF downloadable |
Frequently Asked Questions - UDD378S8 Avantco
How do I install the Avantco UDD378S8 beer dispenser?
Place the unit on a level surface with at least 4 inches of clearance on all sides for ventilation. Plug into a grounded 115V outlet. Install the beer coupler and faucet according to the manual. Allow 24 hours for temperature stabilization before use.
What is the optimal temperature for dispensing beer?
Set the thermostat to maintain a temperature between 34°F and 38°F for ideal carbonation and serving temperature.
How often should I clean the beer lines?
Flush the lines with a cleaning solution daily and perform a thorough sanitization weekly to prevent bacterial buildup and off-flavors.
What type of kegs does this dispenser accommodate?
It is designed for standard 1/2 barrel kegs (15.5 gallons) with a Sankey D coupler. Smaller kegs may require adapter.
Why is the beer dispenser not cooling properly?
Check that the unit is plugged in, the circuit breaker is not tripped, and the thermostat is set to the correct temperature. Ensure proper ventilation around the compressor. If still not cooling, contact a technician.
How do I clean the exterior and interior?
Use a damp cloth with mild detergent for the stainless steel exterior. For the interior, unplug the unit, remove keg, and wipe with a solution of warm water and baking soda. Rinse and dry thoroughly.
Can I use this dispenser for other beverages besides beer?
It is designed for carbonated beverages like beer and cider. Non-carbonated or sugary drinks may clog the system.
How do I troubleshoot foaming beer?
Ensure temperature is proper, lines are clean, and coupler is fully engaged. Check for excessive CO2 pressure; adjust regulator to 12-14 psi. Also, ensure glass is clean and tilted when pouring.
Where can I find replacement parts?
Authorized Avantco dealers and online retailers offer parts such as faucets, couplers, cooling fans, and gaskets. Use the model number UDD378S8 to ensure compatibility.
What is the warranty on this dispenser?
Avantco typically offers a 1-year limited warranty on parts and labor for commercial use. Check your manual or contact customer support for details.
User questions about UDD378S8 Avantco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer dispenser in PDF format for free! Find your manual UDD378S8 - Avantco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UDD378S8 by Avantco.
USER MANUAL UDD378S8 Avantco
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Avantco
Model : UDD378S8
Category : Beer dispenser