UDD-4-HC-S - Beer dispenser Avantco - Free user manual and instructions
Find the device manual for free UDD-4-HC-S Avantco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Commercial Beer Dispenser |
| Model | UDD-4-HC-S |
| Brand | Avantco |
| Number of Taps | 4 |
| Dimensions (W x D x H) | 29" x 32" x 34" |
| Weight | 180 lbs |
| Power Supply | 115V / 60Hz, 5.5A |
| Refrigerant Type | R-290 (Propane) or R-134a |
| Temperature Range | 35°F - 45°F (2°C - 7°C) |
| Main Functions | Cooling and dispensing draft beer from standard kegs |
| Installation Type | Undercounter or freestanding |
| Display / Controls | Digital thermostat with push-button controls |
| Cleaning & Maintenance | Regular cleaning of beer lines, taps, and drip tray; defrost as needed |
| Safety Features | GFCI compatible plug, automatic defrost cycle |
| Spare Parts Available | Tap handles, CO2 regulator, beer line cleaning kit, drip tray |
| Reparability | Modular components; compressor accessible; standard parts |
| General Information | Stainless steel exterior, foam insulated, self-contained refrigeration |
Frequently Asked Questions - UDD-4-HC-S Avantco
How do I set the temperature on my Avantco UDD-4-HC-S?
Use the digital control panel to adjust the thermostat. Press the UP or DOWN buttons to set the desired temperature between 35°F and 45°F. Allow 24 hours for the temperature to stabilize.
What type of kegs are compatible with this dispenser?
This dispenser is designed for standard 1/2 barrel, 1/4 barrel, and sixth barrel kegs with a standard American sankey coupler. Ensure the keg fits within the cabinet dimensions.
How often should I clean the beer lines and taps?
Clean the beer lines and taps every two weeks for optimal taste and hygiene. Use a dedicated beer line cleaning kit with a mild alkaline cleaner, followed by a water rinse.
My dispenser is not cooling properly. What should I check?
First, ensure the unit is plugged into a working GFCI outlet and the temperature setpoint is correct. Check for proper airflow around the condenser coils and clean them if dusty. Also, verify that the door seals are tight.
Can I use this dispenser outdoors?
No, this unit is designed for indoor use only. Exposure to rain, direct sunlight, or extreme temperatures can damage the refrigeration system and void the warranty.
How do I replace a tap handle?
Unscrew the old tap handle counterclockwise. Apply a small amount of thread sealant to the new handle's threads to prevent leaks, then screw it on clockwise until tight.
What should I do if beer is foamy?
Foamy beer can be caused by improper pressure, warm beer, or dirty lines. Check that the CO2 pressure is set correctly (usually 10-12 PSI for most beers), ensure the beer is sufficiently chilled, and clean the lines.
Is the Avantco UDD-4-HC-S Energy Star rated?
This model is not Energy Star rated, but it features high-quality insulation and efficient compressor technology to minimize energy consumption.
What safety precautions should I follow?
Always plug the unit into a GFCI-protected outlet to prevent electric shock. Do not block ventilation grills. Keep the area around the dispenser clear of flammable materials. Never immerse the electrical components in water.
Where can I find replacement parts or service?
Contact Avantco customer service or your local commercial refrigeration parts distributor. Common spare parts like tap handles, CO2 regulators, and cleaning kits are widely available online.
User questions about UDD-4-HC-S Avantco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer dispenser in PDF format for free! Find your manual UDD-4-HC-S - Avantco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UDD-4-HC-S by Avantco.