UDD-72-HC - Beer dispenser Avantco - Free user manual and instructions
Find the device manual for free UDD-72-HC Avantco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Commercial Beer Dispenser |
| Brand | Avantco |
| Model | UDD-72-HC |
| Dimensions (W x D x H) | 72 x 30 x 38 inches |
| Weight | 350 lbs |
| Power Supply | 115V / 60Hz / 1-Phase |
| Cooling Type | Forced Air (self-contained condenser) |
| Temperature Range | 33-40°F |
| Capacity | Up to 12 half-barrel kegs |
| Number of Doors | 2 |
| Digital Thermostat | Yes, with LED display |
| Interior Lighting | LED |
| Castors | 4 locking castors |
| Door Lock | Keyed lock on each door |
| Cleaning Instruction | Monthly condenser coil cleaning; stainless steel interior wipe down |
| Safety Features | Automatic defrost; high-temp alarm |
| Warranty | 3 years parts and labor |
| Repairability | Modular components; accessible compressor and control board |
Frequently Asked Questions - UDD-72-HC Avantco
How do I set the temperature on the Avantco UDD-72-HC?
Use the digital thermostat panel on the front. Press SET then use the arrows to adjust between 33-40°F. Confirm with SET.
What type of kegs fit in this dispenser?
Standard half-barrel (full-size) kegs, as well as slim quarter or sixth-barrels. Maximum height 24 inches.
How often should I clean the condenser coils?
Every 30 days to maintain efficiency. Unplug the unit, remove the front grille, and use a soft brush or vacuum. Do not use water.
The beer is not cold enough. What could be wrong?
Check the temperature setting (should be 33-40°F). Ensure condenser coils are clean and the door seals are tight. If still warm, call service.
Can I adjust the door swing?
Doors are field-reversible. Refer to the manual for hinge relocation instructions. Tools required: screwdriver and wrench.
How do I replace a door gasket?
Remove the old gasket by pulling it from the groove. Clean the channel, then press the new gasket firmly into place. Ensure no gaps.
What maintenance is required for the keg coupler?
After each keg change, rinse the coupler with warm water and sanitize with a food-grade sanitizer. Replace rubber seals every 6 months.
The unit is making a loud noise. Is that normal?
Some noise from the compressor and fans is normal, but loud banging or rattling may indicate a loose part. Check the condenser fan blade and level the unit.
How do I defrost the evaporator?
The unit has an automatic defrost cycle. If ice buildup occurs, unplug and leave doors open until ice melts. Do not scrape with a tool.
What is the appropriate ambient temperature for operation?
The UDD-72-HC is designed for indoor use in ambient temperatures between 60-90°F. Higher ambient may reduce cooling efficiency.
User questions about UDD-72-HC Avantco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer dispenser in PDF format for free! Find your manual UDD-72-HC - Avantco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UDD-72-HC by Avantco.
USER MANUAL UDD-72-HC Avantco
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Avantco
Model : UDD-72-HC
Category : Beer dispenser