HSSVFRD20NGBT - Heating HeatStar - Free user manual and instructions
Find the device manual for free HSSVFRD20NGBT HeatStar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Propane Forced Air Heater |
| Model | HSSVFRD20NGBT |
| Brand | HeatStar |
| Fuel Type | Propane (LP) |
| BTU Rating | 30,000 BTU/h |
| Heating Area | Up to 1,000 sq ft |
| Dimensions (L x W x H) | 20 x 15 x 15 inches |
| Weight | 28 lbs |
| Power Supply | 120V AC, 60Hz (for fan) |
| Ignition | Piezo spark ignition |
| Thermostat Control | Adjustable thermostat with remote control option |
| Safety Features | Tip-over switch, oxygen depletion sensor, flame failure safety |
| Maintenance | Clean air filter monthly; inspect fuel lines annually |
| Spare Parts Availability | Fan motor, thermocouple, gas valve, igniter available |
| Repairability | Modular design with accessible components |
| Certifications | CSA, ANSI Z83.7 |
| Operating Noise | Approx. 55 dB at normal operation |
Frequently Asked Questions - HSSVFRD20NGBT HeatStar
What type of fuel does the HeatStar HSSVFRD20NGBT use?
This heater uses propane (LP) gas. Do not use natural gas.
How do I ignite the heater?
Turn the gas valve to the 'On' position, push the control knob and press the piezo igniter button repeatedly until the burner lights.
What safety features are included?
The heater includes a tip-over switch, oxygen depletion sensor (ODS), and flame failure safety that shuts off gas if the flame goes out.
Can I use this heater indoors?
This heater is for indoor use only in well-ventilated areas. Ensure adequate ventilation to prevent carbon monoxide build-up.
How do I clean the air filter?
Remove the air filter cover, take out the filter, and wash it with warm soapy water. Dry completely before reinstalling. Clean monthly.
What size area can the HSSVFRD20NGBT heat?
It can heat up to approximately 1,000 square feet depending on insulation and ceiling height.
Does the heater have a thermostat?
Yes, it has an adjustable thermostat that allows you to set the desired room temperature.
What should I do if the heater does not ignite?
Check that the gas supply is on and the propane tank is not empty. Ensure the igniter battery is charged (if applicable). Also clean the burner assembly.
Is the heater noisy?
The fan produces a moderate noise level, approximately 55 dB, similar to a window air conditioner.
Where can I find replacement parts?
Replacement parts such as the fan motor, thermocouple, and gas valve are available from HeatStar authorized dealers or online retailers.
User questions about HSSVFRD20NGBT HeatStar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual HSSVFRD20NGBT - HeatStar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HSSVFRD20NGBT by HeatStar.