HSSVFBF20NGBT - Heating HeatStar - Free user manual and instructions
Find the device manual for free HSSVFBF20NGBT HeatStar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gas-Fired Forced Air Heater |
| Model | HSSVFBF20NGBT |
| Brand | HeatStar |
| Fuel Type | Natural Gas |
| BTU Rating | 20,000 BTU/hr |
| Heating Area | Up to 500 sq ft |
| Dimensions (W x H x D) | 18 x 12 x 10 inches |
| Weight | 15 lbs |
| Power Supply | 120V AC / 60 Hz (for blower) |
| Ignition Type | Piezo Electronic Ignition |
| Control Type | Manual On/Off Valve |
| Safety Features | Oxygen Depletion Sensor (ODS), Tip-Over Switch, Flame Failure Safety |
| Venting | Vent-Free (Room-Side Combustion) |
| Installation | Wall-Mounted or Floor-Standing |
| Maintenance | Clean burner and pilot annually; inspect for dust |
| Spare Parts | Thermocouple, gas valve, igniter available |
| Certifications | ANSI Z21.11.2, CSA 4.3 |
| Color | Black / Beige |
Frequently Asked Questions - HSSVFBF20NGBT HeatStar
What fuel does the HeatStar HSSVFBF20NGBT use?
The HeatStar HSSVFBF20NGBT is designed for natural gas only. Do not use propane or butane.
Can this heater be used indoors?
Yes, it is a vent-free heater approved for indoor use. Ensure adequate ventilation as per local codes.
How do I light the heater?
Turn the gas valve to the pilot position, push and hold the knob, press the piezo igniter button multiple times until the pilot lights. Hold for 30 seconds, then turn to ON.
What size room can the HSSVFBF20NGBT heat?
With 20,000 BTU, it can heat rooms up to 500 square feet effectively. Actual results depend on insulation.
Is professional installation required?
While DIY is possible, we recommend professional installation to ensure proper gas connection and safety.
What safety features does this heater have?
It includes an Oxygen Depletion Sensor (ODS), tip-over switch, and a flame failure safety that shuts off gas if the flame goes out.
How often should I clean the heater?
Clean the burner and pilot assembly annually before each heating season. Keep the area around the heater free of dust.
What do I do if the pilot won't stay lit?
Check the thermocouple for proper contact. It may need cleaning or replacement. Also ensure the gas valve is fully open.
Can I use this heater without electricity?
Yes, the heater operates without electricity except for the blower (if equipped). The pilot and main burner use only gas.
Where can I find replacement parts?
Replacement parts like thermocouples, igniters, and gas valves can be ordered from authorized HeatStar dealers or online retailers.
User questions about HSSVFBF20NGBT HeatStar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual HSSVFBF20NGBT - HeatStar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HSSVFBF20NGBT by HeatStar.
USER MANUAL HSSVFBF20NGBT HeatStar
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HeatStar
Model : HSSVFBF20NGBT
Category : Heating