HSSVFRD30LPBT - Heating HeatStar - Free user manual and instructions
Find the device manual for free HSSVFRD30LPBT HeatStar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Propane Forced Air Heater |
| Brand | HeatStar |
| Model | HSSVFRD30LPBT |
| BTU Rating | 30,000 BTU/hr |
| Fuel Type | Propane (LP) |
| Ignition Type | Piezo spark ignition |
| Heating Area | Up to 1,000 sq ft |
| Dimensions (L x W x H) | 15.5 x 13 x 11.5 inches |
| Weight | 18.5 lbs |
| Power Source | 120V AC, 60 Hz, 1.5A |
| Safety Features | Tip-over switch, oxygen depletion sensor, overheat protection |
| Fuel Consumption | Approx 1.1 lbs/hr |
| Tank Type | Standard 20 lb propane tank (not included) |
| Hose Length | 10 ft |
| Regulator Included | Yes, high-pressure |
| Warranty | 1 year |
| Certification | CSA certified |
| Color | Red and black |
| Noise Level | 65 dB |
| Operating Temperature Range | -20°F to 104°F |
| Storage | Indoor storage recommended when not in use |
| Maintenance | Keep clean, inspect hose before each use |
| Usage Tips | Ventilate area, never leave unattended |
Frequently Asked Questions - HSSVFRD30LPBT HeatStar
What type of fuel does the HSSVFRD30LPBT use?
The HSSVFRD30LPBT uses propane (LP) gas. It requires a standard 20 lb propane tank (not included) and a high-pressure regulator.
How do I ignite the heater?
To ignite, turn the gas control knob to the 'Pilot' position, press and hold, then press the piezo igniter button repeatedly until the pilot lights. Hold the knob for 30 seconds, then turn to 'On'. Ensure proper ventilation.
What safety features does it have?
The heater includes a tip-over switch, oxygen depletion sensor, and overheat protection. These automatically shut off the gas supply in unsafe conditions.
Can I use this heater indoors?
Yes, but only in well-ventilated areas. Never use in confined spaces without proper airflow. Always follow local codes and maintain clearance from combustibles.
How do I clean and maintain it?
Regularly wipe the exterior with a damp cloth, inspect the hose for cracks, and clean the air intake with compressed air. Do not use solvents. Store indoors when not in use.
What is the heating area?
The 30,000 BTU output can heat up to 1,000 square feet, depending on insulation and climate. Use it to supplement heating in garages, workshops, or job sites.
Does it include a propane tank?
No, the propane tank is not included. You need a standard 20 lb propane tank (often sold separately) and ensure the tank is filled and properly connected.
How do I store it when not in use?
Disconnect the propane tank, store the heater indoors in a dry, clean place. Keep the hose and regulator in a sealed bag. Never store propane tanks indoors.
What should I do if the heater doesn't start?
Check gas supply (tank full, valve open), igniter spark (clean electrode), and safety sensors (tip-over, oxygen sensor). Consult the manual for troubleshooting steps.
Is it CSA certified?
Yes, the HSSVFRD30LPBT is CSA certified to ensure compliance with North American safety standards for portable propane heaters.
User questions about HSSVFRD30LPBT HeatStar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual HSSVFRD30LPBT - HeatStar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HSSVFRD30LPBT by HeatStar.
USER MANUAL HSSVFRD30LPBT HeatStar
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HeatStar
Model : HSSVFRD30LPBT
Category : Heating