PDU41002 - Network switch CyberPower - Free user manual and instructions
Find the device manual for free PDU41002 CyberPower in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack-mount Power Distribution Unit (PDU) with network switching |
| Model | PDU41002 |
| Brand | CyberPower |
| Form Factor | 1U, 19-inch rack-mountable |
| Dimensions (H x W x D) | 1.75 x 17.3 x 6.5 inches (44 x 440 x 165 mm) |
| Weight | 5.5 lbs (2.5 kg) |
| Input Voltage | 100-120 VAC, 50/60 Hz |
| Input Connector | NEMA 5-15P |
| Output Voltage | 100-120 VAC |
| Outlets | 8 x NEMA 5-15R |
| Rated Input Current | 15 A |
| Network Interface | Ethernet 10/100 Mbps (RJ45) for remote monitoring and control |
| Monitoring Features | Real-time power monitoring (voltage, current, power, energy), outlet-level switching, event logging |
| Management | Web interface, SNMP, Telnet, SSH, and PowerPanel® management software |
| Safety Certifications | UL, cUL, FCC Class A |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity Range | 0% to 95% non-condensing |
| Power Cord Length | 6 feet (1.8 m) |
| Warranty | 3 years |
Frequently Asked Questions - PDU41002 CyberPower
How do I reset the PDU41002 to factory defaults?
Press and hold the reset button on the front panel for 10 seconds using a paperclip until the LED blinks rapidly. The device will reboot with factory settings.
Can I control individual outlets remotely?
Yes, the PDU41002 supports outlet-level remote power control via the web interface, SNMP, or PowerPanel management software.
What is the default IP address of the PDU?
The default IP address is 192.168.1.100. You can also use DHCP or set a static IP via the LCD panel or the included utility.
How do I update the firmware?
Download the latest firmware from CyberPower's website. Log into the web interface, go to Maintenance > Firmware Update, and upload the .bin file. Do not power off during update.
What is the maximum load for the PDU41002?
The maximum load is 15A at 120V, which equals 1800 VA. Do not exceed this rating to avoid overloading.
Does the PDU support SNMP v3?
Yes, it supports SNMP v1, v2c, and v3 for secure network management.
How can I mount the PDU in a rack?
Use the included mounting brackets and screws. Attach brackets to the sides of the PDU and slide into the rack rails. Secure with cage nuts or screws.
What should I do if the PDU is not powering on?
Check the input power cord connection and ensure the circuit breaker is not tripped. Test the outlet with another device. If still not working, contact CyberPower support.
Can I use this PDU with 220V power?
No, the PDU41002 is designed for 100-120V input only. Using 220V will damage the unit.
Where can I download the user manual?
The manual can be downloaded from the CyberPower support page: www.cyberpower.com/support. Search for 'PDU41002' and select the manual in PDF format.
User questions about PDU41002 CyberPower
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual PDU41002 - CyberPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PDU41002 by CyberPower.
USER MANUAL PDU41002 CyberPower
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CyberPower
Model : PDU41002
Category : Network switch