PDU20SWHVIEC8FNET - Network switch CyberPower - Free user manual and instructions
Find the device manual for free PDU20SWHVIEC8FNET CyberPower in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Switched PDU (Power Distribution Unit) |
| Model | PDU20SWHVIEC8FNET |
| Brand | CyberPower |
| Number of Outlets | 20 (IEC C13/C19) |
| Input Voltage | 200-240V AC |
| Maximum Current | 20A |
| Maximum Power | 4800W (at 240V) |
| Form Factor | Rack-mountable, 1U |
| Dimensions (WxDxH) | 17.24 x 6.69 x 1.75 inches (438 x 170 x 44.5 mm) |
| Weight | 8.8 lbs (4.0 kg) |
| Management Interface | Ethernet (RJ45), SNMP, Web, Telnet, SSH |
| Switching Capacity | Per-outlet remote switching control |
| Monitoring Features | Real-time power usage, current, voltage, power factor |
| Environmental Monitoring | Optional external temperature/humidity sensor |
| Power Cord | NEMA L6-20P to IEC C20, 10 ft (3 m) |
| Safety Certifications | UL, cUL, FCC Class A |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity Range | 0% to 90% non-condensing |
| Mounting Orientation | Horizontal or vertical (with optional brackets) |
| Reset Button | Yes, for network configuration reset |
| Firmware Upgrade | Via web interface or TFTP |
Frequently Asked Questions - PDU20SWHVIEC8FNET CyberPower
How do I reset the PDU to factory default?
Press and hold the reset button (located near the network port) for 10 seconds using a paperclip. The device will reboot with factory settings.
Can I monitor power usage per outlet?
Yes, the PDU provides real-time power monitoring at the outlet level through the web interface or SNMP. You can view current, voltage, and power consumption per outlet.
What is the default IP address of the PDU?
The default IP is 192.168.1.100. If the device cannot obtain an IP via DHCP, it falls back to this static address.
How do I update the firmware?
Download the latest firmware from the CyberPower website. Access the web interface, go to Administration > Firmware Update, then upload the file or use TFTP to the device's IP.
Can I control outlets remotely?
Yes, you can turn on/off, reboot, or schedule outlets individually via the web interface, SNMP, or command-line interface (SSH/Telnet).
What types of plugs are supported on the PDU?
The PDU has 20 IEC C13 and C19 outlets. Input is NEMA L6-20P. Adapters may be needed for other plug types.
Does the PDU support SNMP v3?
Yes, SNMP v1, v2c, and v3 are supported for secure management and integration with network monitoring systems.
How do I set up email alerts?
Navigate to Event Management > Email Notification in the web interface. Enter SMTP server details and select events like overcurrent or outlet failure.
What is the maximum load per outlet?
Each outlet is rated for a maximum of 10A (C13) or 16A (C19). Total PDU load must not exceed 20A.
Can I mount the PDU vertically?
Yes, the PDU can be mounted vertically using optional mounting brackets. The included horizontal rack ears are for 1U rack mounting.
User questions about PDU20SWHVIEC8FNET CyberPower
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual PDU20SWHVIEC8FNET - CyberPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PDU20SWHVIEC8FNET by CyberPower.
USER MANUAL PDU20SWHVIEC8FNET CyberPower
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CyberPower
Model : PDU20SWHVIEC8FNET
Category : Network switch