D4S - Uncategorized PEAVEY - Free user manual and instructions
Find the device manual for free D4S PEAVEY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power Amplifier |
| Rackmount Size | 2U, 19-inch standard |
| Dimensions (W x D x H) | 19 x 15 x 3.5 inches |
| Weight | 22 lbs (10 kg) |
| Power Supply | AC 100-240V, 50/60Hz |
| Output Power (per channel) | 500W at 8 ohms, 800W at 4 ohms |
| Number of Channels | 2 |
| Input Connectors | XLR and 1/4" TRS combo jacks |
| Output Connectors | Speakon and binding posts |
| Frequency Response | 20 Hz – 20 kHz ±0.5 dB |
| THD + Noise | < 0.05% |
| Signal-to-Noise Ratio | > 100 dB |
| Cooling System | Variable speed fan, front-to-rear airflow |
| Protection Features | Short circuit, thermal, DC offset, overcurrent |
| Front Panel Indicators | Signal, clip, protect, power LEDs |
| Rear Panel Controls | Input sensitivity switch, mode selector (stereo/parallel/bridge) |
| Maintenance | Clean exterior with dry cloth; ensure adequate ventilation |
| Included Accessories | Power cord, user manual |
Frequently Asked Questions - D4S PEAVEY
What is the power output of the Peavey D4S?
The Peavey D4S delivers 500W per channel at 8 ohms and 800W per channel at 4 ohms, with a bridged mono output of 1600W at 8 ohms.
What type of input connectors does the D4S have?
The amplifier features combo jacks that accept both XLR and 1/4" TRS connections, providing versatility for various sources.
How do I set the amplifier to bridged mode?
Set the rear panel mode switch to 'Bridge'. Connect the speaker to the positive terminal of Channel A and the negative terminal of Channel B. Ensure input signal is fed to Channel A only.
What protection features are built into the D4S?
The D4S includes short circuit, thermal overload, DC offset, and overcurrent protection to safeguard the amplifier and connected speakers.
Can the Peavey D4S be used with a generator?
Yes, the switching power supply accepts 100-240V AC, 50/60Hz, making it compatible with most generators. Ensure the generator provides clean, stable power.
How do I reduce fan noise?
The fan speed is temperature-controlled. Ensure proper ventilation and avoid blocking the front or rear vents. In normal operation, the fan runs at low speed.
What speaker impedance can the D4S handle?
The amplifier is stable with 2 ohm loads per channel in stereo mode (minimum 4 ohms in bridge mode). Always match speaker impedance to avoid overheating.
The 'Protect' LED is on. What should I do?
Turn off the amplifier, check speaker connections for shorts, and ensure adequate ventilation. If the LED remains on after restarting, contact Peavey service.
What is the recommended cleaning procedure?
Disconnect power and use a dry, lint-free cloth to wipe the exterior. Do not use solvents. Clean the front grille and fan intake periodically with a vacuum.
Does the D4S have a standby mode?
No, the unit does not have a standby mode. Turn off the power switch on the front panel when not in use to save energy.
User questions about D4S PEAVEY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual D4S - PEAVEY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. D4S by PEAVEY.
USER MANUAL D4S PEAVEY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PEAVEY
Model : D4S
Category : Uncategorized