PVXp 10 DSP - Loudspeaker PEAVEY - Free user manual and instructions
Find the device manual for free PVXp 10 DSP PEAVEY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Loudspeaker with DSP |
| Speaker Size | 10-inch (254 mm) woofer |
| Power Output | 400 Watts (program) / 800 Watts (peak) |
| Frequency Response | 55 Hz - 20 kHz (-10 dB) |
| Maximum SPL | 124 dB continuous |
| Amplifier Type | Class-D amplifier |
| DSP Features | Presets for EQ, crossover, limiting, and feedback suppression |
| Inputs | XLR combo (mic/line) with gain control, RCA stereo |
| Outputs | XLR mix output |
| Enclosure Material | Polypropylene molded cabinet |
| Grille | Perforated steel with foam backing |
| Pole Mount | Yes, 35 mm socket |
| Handle | Molded top handle |
| Dimensions (H x W x D) | 19.7 x 12.9 x 12.2 inches (500 x 328 x 310 mm) |
| Weight | 25.8 lbs (11.7 kg) |
| Power Supply | AC 100-240V, 50/60 Hz, via IEC cord |
| Safety Features | Thermal protection, overcurrent protection, limiter |
| Maintenance | Wipe with dry cloth; avoid solvents; keep vents clear |
| Repairability | Replaceable amplifier module; contact Peavey service |
| Warranty | 2 years limited warranty (check local terms) |
Frequently Asked Questions - PVXp 10 DSP PEAVEY
How do I connect a microphone to the PVXp 10 DSP?
Connect an XLR cable from the microphone to the combo input on the rear panel. Adjust the gain control to achieve appropriate level without clipping.
What DSP presets are available?
The DSP includes presets for music, speech, and monitor modes. Press the 'Preset' button to cycle through options.
Can I use this speaker on a stand?
Yes, the PVXp 10 DSP has a 35mm pole mount socket. Use a compatible speaker stand with a 35mm pole and ensure the speaker is securely mounted.
What is the recommended cleaning method?
Unplug the speaker and wipe the cabinet with a dry, soft cloth. Do not use liquids, abrasives, or compressed air.
Why is the speaker not producing sound?
Check that the power cord is connected and the power switch is on. Verify the audio source is active and the gain is turned up. Ensure the limiter is not engaged.
Can I daisy-chain multiple speakers?
Yes, use the XLR mix output to connect to the input of another powered speaker. Keep total cable runs under 100 feet to avoid signal degradation.
How do I adjust the EQ?
The PVXp 10 DSP has a built-in EQ accessible via the DSP menu. Press and hold the 'EQ' button to adjust bass, mid, and treble in 2 dB steps.
What should I do if the thermal protection activates?
Allow the speaker to cool down by reducing the volume or turning it off. Ensure the vents are not blocked. The protection will reset automatically when the temperature drops below the threshold.
Is the speaker suitable for outdoor use?
The PVXp 10 DSP is designed for indoor use but can be used outdoors if protected from direct rain and moisture. Do not expose to water or extreme humidity.
How do I reset the DSP to factory defaults?
Press and hold the 'Preset' and 'EQ' buttons simultaneously for 5 seconds. The display will show 'rSt' and then reboot. All settings will return to factory defaults.
User questions about PVXp 10 DSP PEAVEY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PVXp 10 DSP - PEAVEY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PVXp 10 DSP by PEAVEY.
USER MANUAL PVXp 10 DSP PEAVEY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PEAVEY
Model : PVXp 10 DSP
Category : Loudspeaker