SSE 12 - Loudspeaker PEAVEY - Free user manual and instructions
Find the device manual for free SSE 12 PEAVEY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Passive Loudspeaker |
| Woofer | 12-inch (304.8 mm) heavy-duty |
| Tweeter | RX 22 1.75-inch (44.45 mm) titanium diaphragm compression driver |
| Frequency Response | 65 Hz – 18 kHz (±3 dB) |
| Power Handling (Program) | 400 W |
| Power Handling (Continuous) | 200 W |
| Impedance | 8 ohms |
| Sensitivity (1W/1m) | 97 dB SPL |
| Maximum SPL | 123 dB SPL (continuous) |
| Connectors | 2 x Neutrik Speakon NL4 |
| Enclosure Material | 15 mm plywood with black carpet covering |
| Grille | 16-gauge perforated steel with acoustically transparent foam |
| Dimensions (H x W x D) | 24.4 x 15.8 x 13.8 inches (620 x 401 x 351 mm) |
| Weight | 48.5 lb (22 kg) |
| Mounting | 35 mm pole mount socket; flying points available |
| Power Supply | Passive (no built-in amplifier; requires external amp) |
| Main Functions | Sound reinforcement in portable PA and installed systems |
| Maintenance and Cleaning | Wipe with dry cloth; avoid moisture and cleaning solvents |
| Safety | Do not expose to rain or moisture; use proper stands |
| Spare Parts and Repairability | Contact Peavey authorized service for replacement speakers or drivers |
Frequently Asked Questions - SSE 12 PEAVEY
What amplifier power is recommended for the Peavey SSE 12?
A power amplifier rated between 200 and 400 watts RMS at 8 ohms is recommended for optimal performance.
How do I connect the SSE 12 to an amplifier?
Use a Speakon NL4 cable. The speaker has two NL4 connectors for daisy-chaining. Connect the amplifier to one of them.
Can the SSE 12 be used as a floor monitor?
Yes, it can be placed on its side as a wedge monitor. Ensure stable placement to avoid tipping.
What is the maximum SPL of the SSE 12?
The maximum continuous SPL is 123 dB. Peak levels may be slightly higher.
How do I clean the SSE 12?
Wipe the enclosure with a dry, soft cloth. Do not use liquids or abrasive cleaners.
Can I mount the SSE 12 on a speaker stand?
Yes, it has a 35 mm pole mount socket on the bottom. Use a sturdy stand rated for the weight.
What type of tweeter does the SSE 12 use?
It uses a Peavey RX 22 compression driver with a titanium diaphragm for high frequencies.
Is the SSE 12 suitable for outdoor use?
It can be used outdoors but must be protected from rain and direct moisture. The carpet covering is not waterproof.
What is the warranty on the SSE 12?
Peavey typically offers a limited warranty. Check with your dealer or Peavey for exact terms.
Can I daisy-chain multiple SSE 12 speakers?
Yes, using the second Speakon connector. Ensure amplifier impedance is not compromised (e.g., two 8-ohm speakers in parallel = 4 ohms).
User questions about SSE 12 PEAVEY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SSE 12 - PEAVEY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SSE 12 by PEAVEY.
USER MANUAL SSE 12 PEAVEY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PEAVEY
Model : SSE 12
Category : Loudspeaker