CFB 9463 X - Range hood BEKO - Free user manual and instructions
Find the device manual for free CFB 9463 X BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Chimney range hood |
| Width | 90 cm |
| Depth | 50 cm |
| Height (min/max) | 60 - 110 cm |
| Weight | 15 kg |
| Voltage/Frequency | 220-240 V / 50 Hz |
| Motor power | 200 W |
| Maximum extraction rate | 650 m³/h |
| Number of speeds | 3 |
| Lighting | LED, 2 x 1.5 W |
| Grease filter type | Aluminum mesh, washable |
| Carbon filter option | Yes (sold separately) |
| Energy efficiency class | A |
| Noise level (max speed) | 58 dB(A) |
| Controls | Push buttons |
| Ducting diameter | 150 mm |
| Recirculation mode | Possible with carbon filter |
| Material | Stainless steel |
| Installation type | Wall mounted |
| Spare parts availability | At least 7 years after last production |
| Reparability | Repairable with original spare parts |
Frequently Asked Questions - CFB 9463 X BEKO
How to install the range hood?
Installation should be carried out by a qualified technician. Ensure the hood is at least 65-75 cm above the hob. Drill holes for wall brackets, mount the chimney, and connect the ducting or set for recirculation. Refer to the manual for detailed steps.
How to clean the grease filters?
Remove the aluminum mesh filters and wash them in warm soapy water or in the dishwasher at low temperature. Dry thoroughly before reinserting. Clean filters every month for optimal performance.
How to replace the carbon filter?
The carbon filter is used in recirculation mode. To replace, remove the grease filters, then take out the old carbon filter and insert a new one. It should be replaced every 3-6 months depending on usage.
How to reduce the noise level?
Ensure the hood is properly installed and not vibrating against cabinets. Use lower speed settings for quieter operation. Regular cleaning of filters also reduces noise.
What to do if the hood does not work?
Check if the power cord is plugged in and the circuit breaker is not tripped. Ensure the control buttons are not locked. If the issue persists, contact a service technician.
How to switch from ducted to recirculation mode?
For recirculation, you need a carbon filter. Install the carbon filter behind the grease filter. Also, block the external duct outlet if previously used. Follow the manual for proper conversion.
What is the recommended distance between hob and hood?
For electric hobs, minimum distance is 65 cm; for gas hobs, 75 cm. Check local regulations and the hob manual for specific requirements.
How to change the LED bulb?
The LED lights are integrated and may require a technician to replace. If defective, contact Beko service for a replacement. Do not attempt to open the housing.
Why is the hood not extracting properly?
Check if the grease filters are clogged. Ensure the ducting is not blocked or kinked. For recirculation mode, replace the carbon filter. Also, close windows and doors to prevent drafts.
How to maintain the range hood?
Clean the exterior with a mild detergent and soft cloth. Deactivate the hood before cleaning. Perform filter maintenance regularly. Have the hood serviced annually by a professional to ensure longevity.
User questions about CFB 9463 X BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual CFB 9463 X - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CFB 9463 X by BEKO.
USER MANUAL CFB 9463 X BEKO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEKO
Model : CFB 9463 X
Category : Range hood