HNS91120XH - Range hood BEKO - Free user manual and instructions
Find the device manual for free HNS91120XH BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range hood |
| Brand | Beko |
| Model | HNS91120XH |
| Width | 90 cm |
| Installation Type | Built-in / Under cabinet |
| Extraction Type | Ducted or Recirculating |
| Maximum Extraction Rate | 650 m³/h (ducted) |
| Number of Speeds | 3 + Boost |
| Control Type | Electronic push buttons |
| Lighting | 2 x 3W LED lamps |
| Filter Type | Aluminum grease filter (dishwasher safe) |
| Charcoal Filter (optional) | Yes, for recirculation mode |
| Noise Level (max speed) | 65 dB(A) |
| Motor Power | 200 W |
| Dimensions (H x W x D) | 150 mm x 898 mm x 500 mm |
| Weight | 12 kg |
| Energy Efficiency Class | A+ |
| Annual Energy Consumption | 48 kWh/year |
| Ducting Diameter | 150 mm |
| Grease Filter Cleaning | Every 2 months or as needed |
| Charcoal Filter Replacement | Every 6-12 months |
| Safety Features | Auto shut-off, overheat protection |
| Spare Parts Available | Filters, lamps, motor, control board |
| Warranty | 2 years (depending on region) |
Frequently Asked Questions - HNS91120XH BEKO
How do I install the Beko HNS91120XH range hood?
Installation requires fixing the hood to the wall or cabinet above the hob. Ensure ducting is connected for extraction. Refer to the manual for detailed steps. For recirculation mode, install charcoal filters.
How often should I clean the grease filter?
The aluminum grease filter should be cleaned every 2 months or more frequently if used heavily. It is dishwasher safe and can be washed at low temperature.
How do I replace the charcoal filter?
Charcoal filters are used in recirculation mode. They should be replaced every 6-12 months. Open the filter cover, remove the old filter, and insert a new one. Ensure the filter is securely locked.
What type of lamps does the hood use?
The hood uses 2x3W LED lamps. To replace, pry open the lamp holder and remove the old lamp. Insert a new lamp of the same type.
Why is the hood noisy on boost speed?
Boost speed produces maximum airflow, which can cause increased noise up to 65 dB(A). This is normal. For quieter operation, use lower speeds.
Can I use the hood without ducting?
Yes, the hood can be used in recirculation mode. You need to install charcoal filters to absorb odors. The air is then recirculated into the kitchen.
How do I switch between ducted and recirculation mode?
For ducted mode, ensure the ducting is connected to the outlet. For recirculation mode, install charcoal filters and close the ducting outlet with the cover provided.
What should I do if the hood stops working?
Check the power supply and fuse. If the motor doesn't run, it may have overheated and activated auto shut-off. Wait 30 minutes to reset. If issues persist, contact a technician.
How do I adjust the speed?
Use the control panel buttons: Press speed 1-3 for normal operation, or press Boost for maximum extraction for 10 minutes. The selected speed will be indicated by LEDs.
Where can I purchase spare parts?
Spare parts such as filters, lamps, and motors are available from authorized Beko dealers or online spare parts stores. Use the model number HNS91120XH.
User questions about HNS91120XH BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual HNS91120XH - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HNS91120XH by BEKO.
USER MANUAL HNS91120XH BEKO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEKO
Model : HNS91120XH
Category : Range hood