LQC1D-V1 - Dimmer EtiamPro - Free user manual and instructions
Find the device manual for free LQC1D-V1 EtiamPro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dimmer |
| Brand | EtiamPro |
| Model | LQC1D-V1 |
| Dimensions | 80 x 80 x 40 mm |
| Weight | 100 g |
| Supply Voltage | 230 V AC |
| Rated Current | 1.3 A |
| Max Load (LED) | 300 W |
| Max Load (Incandescent/Halogen) | 600 W |
| Control Method | Rotary knob |
| Dimming Range | 0-100% |
| Compatible Bulbs | LED, incandescent, halogen |
| Minimum Load (LED) | 5 W |
| Installation Type | Wall mount |
| Operating Temperature | -10°C to 40°C |
| IP Rating | IP20 |
| Wiring | 2-wire (phase + load) |
| Safety Certifications | CE, RoHS |
| Included Accessories | Mounting screws, instruction manual |
Frequently Asked Questions - LQC1D-V1 EtiamPro
What type of bulbs are compatible with the EtiamPro LQC1D-V1 dimmer?
The dimmer is compatible with LED, incandescent, and halogen bulbs. For LED bulbs, ensure they are marked as dimmable.
What is the maximum load for LED bulbs?
The maximum load for LED bulbs is 300 W. For incandescent/halogen, it is 600 W.
Can I use the dimmer with a 3-way switch setup?
No, the LQC1D-V1 is a single-pole dimmer and is not designed for 3-way installations. Use only with one switch location.
What should I do if the dimmer causes flickering?
Flickering may occur if the LED load is too low or incompatible. Try adding a minimum load resistor or use dimmable LED bulbs rated above 5 W.
Does the dimmer require a neutral wire?
No, the LQC1D-V1 uses a 2-wire configuration (phase and load) and does not require a neutral wire.
How do I install the dimmer?
Turn off power at the circuit breaker. Connect the incoming phase wire to the terminal marked L, and the load wire to the terminal marked OUT. Mount the dimmer into the wall box and attach the knob.
What is the warranty period?
The EtiamPro LQC1D-V1 comes with a 2-year limited warranty against manufacturing defects.
Is the dimmer suitable for outdoor use?
No, the dimmer has an IP20 rating and should only be used indoors in dry locations.
Can I use the dimmer with ceiling fans or ventilation?
No, this dimmer is designed only for resistive and dimmable LED loads. Do not use with motors or transformers.
How do I clean the dimmer?
Clean the surface with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners.
User questions about LQC1D-V1 EtiamPro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dimmer in PDF format for free! Find your manual LQC1D-V1 - EtiamPro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LQC1D-V1 by EtiamPro.
USER MANUAL LQC1D-V1 EtiamPro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EtiamPro
Model : LQC1D-V1
Category : Dimmer