SC-30W-1 - Scanner Soundsation - Free user manual and instructions
Find the device manual for free SC-30W-1 Soundsation in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Laser Scanner |
| Dimensions (mm) | 250 x 200 x 150 |
| Weight (kg) | 2.5 |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 30 W |
| Light Source | Laser Diode, 532 nm (Green) |
| Laser Class | Class 3R (IEC 60825) |
| Control Protocol | DMX512 (3-pin XLR) |
| DMX Channels | 11 Channels |
| Operating Modes | DMX, Sound Active, Auto (Master/Slave) |
| Sweep Angle (Pan) | 540° |
| Sweep Angle (Tilt) | 270° |
| Strobe Rate | 0-20 Hz |
| Dimmer | 0-100% Electronic |
| Mounting | Omega Bracket for Truss or Stand |
| Housing | Aluminum and Steel |
| Cooling | Fan Cooled |
| IP Rating | IP20 (Indoor Use) |
| Operating Temperature | -10°C to 40°C |
| Included Accessories | Power Cord, DMX Cable, Mounting Brackets, User Manual |
| Maintenance | Clean lens with dry cloth; ensure ventilation is not blocked |
| Safety Notes | Do not stare into beam; avoid shining at people; use in well-ventilated area |
| Spare Parts Available | Power supply unit, DMX connector, laser module (qualified technician only) |
| Repair Policy | Contact authorized service center; no user-serviceable parts inside |
Frequently Asked Questions - SC-30W-1 Soundsation
How do I connect the SC-30W-1 to a DMX controller?
Use a standard 3-pin XLR cable to connect the DMX IN of the scanner to the controller's DMX OUT. Set the DMX address using the DIP switches or menu (see manual). Ensure proper termination with a DMX terminator on the last unit.
What is the laser safety class of this scanner?
The Soundsation SC-30W-1 is a Class 3R laser product according to IEC 60825. Avoid direct eye exposure. Do not aim the beam at people or reflective surfaces.
Can I use the scanner in sound-activated mode without a controller?
Yes, select Sound Active mode via the menu. The scanner will respond to music via its built-in microphone. Adjust sensitivity as needed.
How do I clean the lens and housing?
Disconnect power before cleaning. Use a soft, lint-free cloth slightly dampened with water or mild glass cleaner. Do not use abrasive cleaners or solvents. Avoid touching the laser diode.
What is the maximum mounting angle or tilt range?
The scanner provides 540° of pan and 270° of tilt movement for versatile coverage.
Does the scanner have automatic programs?
Yes, it includes built-in auto programs that cycle through predefined patterns and color changes. Use these in Master/Slave mode for synchronized shows without a controller.
What DMX channels does the SC-30W-1 use?
It uses 11 DMX channels controlling pan, tilt, speed, color, gobo, strobe, dimmer, shutter, etc. Refer to the DMX chart in the manual for each channel function.
Can I mount the scanner upside down?
Yes, the scanner can be mounted with the included omega bracket on truss or stands in any orientation. Ensure secure fastening and proper ventilation.
What should I do if the scanner stops responding or overheats?
Check power and DMX connections. Ensure ventilation slots are not blocked. If overheating, allow it to cool down; the unit may have a thermal shutdown. If problem persists, contact a service center.
Are replacement laser modules or power supplies available?
Spare parts such as power supplies and laser modules are available through authorized Soundsation service centers. Only qualified technicians should replace the laser module.
User questions about SC-30W-1 Soundsation
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Scanner in PDF format for free! Find your manual SC-30W-1 - Soundsation and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SC-30W-1 by Soundsation.