115690 - Saw Craftsman - Free user manual and instructions
Find the device manual for free 115690 Craftsman in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circular Saw |
| Brand | Craftsman |
| Model | 115690 |
| Power Source | Electric Corded, 120V, 60Hz, 15A |
| Motor Power | 15 Amps, 5500 RPM |
| Blade Size | 7-1/4 inches (184 mm) |
| Depth of Cut at 90° | 2-1/2 inches (63.5 mm) |
| Depth of Cut at 45° | 1-3/4 inches (44.5 mm) |
| Bevel Capacity | 0° to 50° with positive stops at 0°, 45° |
| Weight | 12.5 lbs (5.7 kg) |
| Dimensions (L x W x H) | 12.5 x 8.5 x 9.8 inches |
| Power Cord Length | 6 feet (1.8 m) |
| Main Features | Blade guard, spindle lock, depth adjustment lever, bevel adjustment knob, ergonomic handle, trigger switch with lock-off |
| Maintenance & Cleaning | Keep ventilation slots clean; inspect carbon brushes periodically; lubricate moving parts with light oil |
| Safety Features | Blade guard, electric brake, double insulation, lock-off button, non-slip grip |
| Spare Parts & Repairability | Blades, brushes, guards available; serviceable by qualified technician; repair manuals online |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - 115690 Craftsman
How do I change the blade on my Craftsman 115690 saw?
Unplug the saw. Press the spindle lock to secure the blade. Use the wrench to loosen the arbor nut (turn clockwise). Remove the outer flange and old blade. Install new blade with teeth facing up at the front. Replace outer flange and tighten nut (counterclockwise).
What type of blade is compatible with the 115690?
The saw uses 7-1/4 inch blades with a 5/8 inch arbor hole. Common types include rip blades, crosscut blades, and combination blades. Always choose a blade rated for the material.
How do I adjust the depth of cut?
Loosen the depth adjustment lever near the base of the saw. Slide the shoe to set the desired depth (blade should extend about 1/4 inch below the material). Tighten the lever securely before cutting.
How do I set the bevel angle?
Loosen the bevel adjustment knob on the front of the saw. Tilt the shoe to the desired angle (0-50°). Use the positive stops at 0° and 45° for common cuts. Tighten the knob firmly.
Why is my saw not starting?
Check the power cord and outlet. Ensure the trigger switch is fully depressed and the lock-off button is released. If still not starting, inspect carbon brushes for wear and replace if necessary.
How do I maintain the saw for longevity?
Regularly clean dust from ventilation slots. Inspect the power cord for damage. Lubricate moving parts. Replace carbon brushes when they reach 1/4 inch length. Store in a dry place.
Can I use this saw for metal cutting?
Yes, but use a metal-cutting abrasive blade. Reduce cutting speed and apply light pressure. Always wear eye protection and follow safety guidelines.
What should I do if the blade guard is stuck?
Unplug the saw. Clean the guard pivot area with compressed air or a brush. Apply a light lubricant. If still stuck, check for debris or damage and have it serviced.
How do I replace the carbon brushes?
Unplug the saw. Remove the brush caps on the motor housing. Slide out old brushes. Insert new brushes (same size) and secure caps. Run the saw for a few minutes to seat brushes.
Where can I find the user manual for the 115690?
The manual is available for free download on notice-facile.com in PDF format. You can also request a translated version by email.
User questions about 115690 Craftsman
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual 115690 - Craftsman and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 115690 by Craftsman.
USER MANUAL 115690 Craftsman
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Craftsman
Model : 115690
Category : Saw