315.349720 - Saw Craftsman - Free user manual and instructions
Find the device manual for free 315.349720 Craftsman in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circular Saw |
| Brand | Craftsman |
| Model | 315.349720 |
| Power Source | Electric (corded) |
| Voltage | 120V |
| Amperage | 15A |
| Blade Diameter | 7-1/4 inches |
| Arbor Size | 5/8 inch |
| No-Load Speed | 5800 RPM |
| Depth of Cut at 90° | 2-1/2 inches |
| Depth of Cut at 45° | 1-7/8 inches |
| Bevel Capacity | 0° to 45° |
| Weight | 10.5 lbs |
| Dimensions (LxWxH) | 12 x 10 x 10 inches |
| Cord Length | 6 feet |
| Included Accessories | Blade, wrench, rip fence |
| Safety Features | Electric brake, spindle lock, trigger lock-off |
| Maintenance | Clean vents, check carbon brushes |
| Dust Port | 1-1/4 inch |
| Warranty | 1 year limited |
Frequently Asked Questions - 315.349720 Craftsman
How do I change the blade on my Craftsman 315.349720?
First, unplug the saw. Press the spindle lock and use the wrench to loosen the arbor nut. Remove the old blade and install the new one with teeth facing the direction of rotation. Tighten the nut securely.
What is the recommended blade size for this saw?
The saw accepts 7-1/4 inch blades with a 5/8 inch arbor. Use carbide-tipped blades for wood cutting.
How do I adjust the depth of cut?
Loosen the depth adjustment lever located near the base. Raise or lower the base to set the desired depth, then tighten the lever. The depth should be about 1/4 inch below the material thickness.
How do I adjust the bevel angle?
Loosen the bevel adjustment knob at the front of the saw. Tilt the base to the desired angle (0° to 45°) and tighten the knob. Use the bevel scale for accuracy.
Why is my saw not starting?
Check if the power cord is plugged in and the outlet is live. Ensure the trigger lock-off is disengaged. If still not starting, inspect the carbon brushes; they may need replacement.
How do I replace the carbon brushes?
Unplug the saw. Remove the brush caps on the motor housing. Slide out the old brushes and insert new ones. Ensure they seat properly, then replace the caps.
What safety precautions should I take when using this saw?
Always wear safety glasses and hearing protection. Keep hands away from the blade. Use the rip fence for straight cuts. Disconnect power before blade changes or maintenance.
How do I clean and maintain the saw?
Blow out dust from vents with compressed air. Wipe the blade and base clean. Check carbon brushes periodically. Lubricate moving parts sparingly.
Can I use this saw for cutting metal?
Yes, with a proper metal-cutting blade. Use a slower speed if adjustable, and apply cutting oil to reduce heat. Ensure the saw is rated for metal cutting.
Where can I find replacement parts?
You can order parts online from Craftsman's website or through authorized dealers. Use the model number 315.349720 to find compatible parts.
User questions about 315.349720 Craftsman
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual 315.349720 - Craftsman and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 315.349720 by Craftsman.
USER MANUAL 315.349720 Craftsman
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Craftsman
Model : 315.349720
Category : Saw