MC4-A - Blender OWI - Free user manual and instructions
Find the device manual for free MC4-A OWI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Personal Blender |
| Brand | OWI |
| Model | MC4-A |
| Dimensions (H x W x D) | 10.2 x 4.7 x 4.7 inches (26 x 12 x 12 cm) |
| Weight | 2.2 lbs (1 kg) |
| Power | 200 watts |
| Voltage | 120V, 60Hz (US standard) |
| Jar Capacity | 16 oz (500 ml) |
| Jar Material | BPA-free Tritan plastic |
| Blade Material | Stainless steel |
| Speed Settings | 2 (Low, High) plus Pulse |
| Pulse Function | Yes, momentary button |
| Base Material | ABS plastic with non-slip feet |
| Safety Lock | Requires jar to be properly seated to start |
| Overheat Protection | Automatic shut-off when motor overheats |
| Cord Length | 30 inches (76 cm) |
| Dishwasher Safe Parts | Jar, lid, and blade assembly (top rack) |
| Cleaning | Wipe base with damp cloth; do not immerse base |
| Warranty | 1 year limited |
| Recommended Use | Smoothies, shakes, sauces, purees |
Frequently Asked Questions - MC4-A OWI
How do I use the OWI MC4-A blender?
Place ingredients in the jar, attach the lid, and place the jar on the base, turning it clockwise to lock. Plug in the blender, select speed (Low or High) or press Pulse for short bursts. Always ensure the lid is securely closed before operating.
What is the maximum capacity for blending?
The jar has a 500 ml (16 oz) capacity. Do not overfill beyond the max fill line; for hot liquids, fill less to avoid splashing. For best results, fill at most 2/3 full.
Can I blend hot ingredients?
Yes, but allow hot liquids to cool to about 140°F (60°C) before blending. Never blend boiling liquids; they can cause pressure buildup and lid ejection. Open the center lid cap to vent steam if needed.
Is the blender jar and blade assembly dishwasher safe?
Yes, the jar, lid, and blade assembly are dishwasher safe on the top rack. Use a gentle cycle and avoid high heat. The base must not be immersed; wipe with a damp cloth only.
Why does the blender stop while blending?
The blender may stop due to overheat protection. Turn off and unplug, let it cool for 15-20 minutes. Also check if the jar is properly locked or if there is a power failure. Ensure the blend is not too thick; add more liquid.
How do I clean the blade assembly?
Rinse immediately after use. For stuck-on residue, fill the jar halfway with warm water and a drop of dish soap, run on high for 30 seconds, then rinse. Do not disassemble the blade; it is fixed.
Can I crush ice with this blender?
Yes, add a little water or liquid, use the Pulse function in short bursts. Do not overfill with ice alone. The stainless steel blades can handle small amounts of ice.
What does the safety lock feature do?
The blender will not start unless the jar is correctly seated and twisted into the lock position on the base. This prevents accidental operation. If the blender does not run, check the jar alignment.
My blender is leaking from the bottom. What should I do?
Remove the jar and check the seal ring (gasket) inside the lid. It may be misaligned or damaged. Ensure the lid is tightened properly. If the leak persists, contact OWI support for replacement parts.
Where can I find a replacement jar or blade?
Replacement parts can be ordered from OWI's official website or through authorized dealers. Use the model number MC4-A. Do not use parts from other models as they may not fit correctly.
User questions about MC4-A OWI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Blender in PDF format for free! Find your manual MC4-A - OWI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MC4-A by OWI.
USER MANUAL MC4-A OWI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : OWI
Model : MC4-A
Category : Blender