AVN-TB10AR - Intercom Sonifex - Free user manual and instructions
Find the device manual for free AVN-TB10AR Sonifex in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Sonifex |
| Model | AVN-TB10AR |
| Product Type | Intercom |
| Dimensions (W x H x D) | 200 x 150 x 50 mm |
| Weight | 0.5 kg |
| Power Supply | PoE (802.3af) or 12V DC |
| Power Consumption | 5W max |
| Audio | Full-duplex, wideband |
| Call Button | Yes, with LED indicator |
| Volume Control | Rotary knob |
| Network Interface | Ethernet 10/100 Mbps |
| Protocol | SIP (Session Initiation Protocol) |
| Mounting | Desktop or wall-mountable |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Clean with a soft, dry cloth. Do not use solvents. |
| Safety | Low voltage device. No user-serviceable parts inside. |
| Spare Parts & Reparability | Contact Sonifex support for replacement parts. Repairs should be performed by qualified personnel. |
Frequently Asked Questions - AVN-TB10AR Sonifex
How do I connect the AVN-TB10AR to my network?
Connect the intercom to your network using an Ethernet cable. The device supports PoE (Power over Ethernet), so if your switch provides PoE, no separate power supply is needed. Otherwise, use the 12V DC input.
What protocol does the intercom use for communication?
The AVN-TB10AR uses the SIP (Session Initiation Protocol) for VoIP communication, making it compatible with most PBX systems and VoIP platforms.
Can I mount the intercom on a wall?
Yes, the unit can be mounted on a wall using the provided bracket. Alternatively, it can be placed on a desk.
How do I adjust the volume?
Use the rotary knob on the front panel to adjust the speaker volume. Turn clockwise to increase, counter-clockwise to decrease.
What does the LED on the call button indicate?
The LED indicates the status of the call: solid green when idle, flashing during an incoming call, and solid red when the line is busy or on a call.
How do I clean the intercom?
Use a soft, dry cloth to wipe the exterior. Do not use any liquids or solvents, as they may damage the device.
What should I do if the intercom does not power on?
First, check the Ethernet cable connection and ensure PoE is active if using that method. If using DC power, verify the power adapter is plugged in and outputting 12V. If the issue persists, contact Sonifex support.
Is the AVN-TB10AR compatible with analog phone systems?
No, this is a pure IP intercom using SIP. It requires a digital network and a SIP-compatible PBX or VoIP service.
Can I use the intercom outdoors?
The AVN-TB10AR is designed for indoor use only. Exposure to moisture or extreme temperatures may damage it.
How do I reset the device to factory defaults?
Press and hold the call button for 10 seconds while powering on the device. The LED will flash rapidly, indicating a factory reset. Release the button after 10 seconds.
User questions about AVN-TB10AR Sonifex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Intercom in PDF format for free! Find your manual AVN-TB10AR - Sonifex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AVN-TB10AR by Sonifex.
USER MANUAL AVN-TB10AR Sonifex
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sonifex
Model : AVN-TB10AR
Category : Intercom