Tungsten Smart-Heat BH0210004 - Heating Bromic - Free user manual and instructions
Find the device manual for free Tungsten Smart-Heat BH0210004 Bromic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Infrared Patio Heater |
| Model | Tungsten Smart-Heat BH0210004 |
| Brand | Bromic |
| Power Source | Electric (120V, 60Hz) |
| Power Output | 1500W (5,119 BTU/h) |
| Heating Technology | Infrared Quartz Tungsten |
| Coverage Area | Up to 200 sq ft (18.6 m²) |
| Voltage | 120V |
| Amperage | 12.5A |
| Dimensions (H x W x D) | 30.5 x 10.2 x 10.2 inches |
| Weight | 14.5 lbs (6.6 kg) |
| Material | Aluminum housing, stainless steel grille |
| Mounting | Wall mount or ceiling mount (hardware included) |
| Control Methods | Smart app (WiFi), remote control, touch panel on unit |
| Smart Features | Compatible with Amazon Alexa and Google Assistant |
| Heat Settings | 3 levels (Low, Medium, High) |
| Safety Features | Overheat protection, tip-over switch, IPX4 weather resistance |
| Warranty | 2 years limited |
| Color | Black |
| Certifications | ETL, FCC |
| Bulb Type | Tungsten quartz tube (replaceable) |
| Usage | Indoor/outdoor (covered patio) |
| Installation | Professional installation recommended for hardwiring |
Frequently Asked Questions - Tungsten Smart-Heat BH0210004 Bromic
What is the recommended mounting height for the Bromic Tungsten Smart-Heat BH0210004?
The recommended mounting height is between 7 to 8 feet (2.1 to 2.4 meters) above the floor for optimal heat distribution.
Can this heater be used indoors?
Yes, the heater can be used indoors in well-ventilated areas, but it is primarily designed for outdoor or covered patio use. Do not use in enclosed spaces without proper ventilation.
How do I connect the heater to the smart app?
Download the Bromic Smart app from the App Store or Google Play. Plug in the heater, press and hold the WiFi button on the control panel until the LED blinks, then follow the app instructions to connect to your home WiFi network.
What are the clearance requirements?
Keep at least 6 inches (15 cm) from ceiling and side walls, and at least 18 inches (46 cm) from any combustible materials. Do not install directly below a shelf or overhang.
How do I clean the heater?
Turn off and unplug the heater. Allow it to cool completely. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or immerse in water. Clean the quartz tube periodically with a dry cloth.
Does the heater have a remote control?
Yes, a remote control is included for basic on/off and heat level adjustments. The smart app offers additional features like scheduling and voice control.
What type of power outlet do I need?
The heater requires a standard 120V, 15A grounded outlet. For hardwiring, consult a licensed electrician. Do not use an extension cord.
Is the heater weatherproof?
Yes, it has an IPX4 rating, meaning it is splash-proof and can withstand rain from any direction. However, it should not be directly exposed to heavy rain or snow.
What should I do if the heater turns off unexpectedly?
Check if the heater has overheated or tipped over. Allow it to cool for 15 minutes, then press the reset button on the control panel. If the problem persists, contact Bromic support.
Can I replace the quartz tube myself?
Yes, the quartz tube is user-replaceable. Purchase a genuine Bromic replacement tube (model BH0210004-R). Unplug the heater, remove the front grille, and follow the manual instructions for replacement.
User questions about Tungsten Smart-Heat BH0210004 Bromic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual Tungsten Smart-Heat BH0210004 - Bromic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Tungsten Smart-Heat BH0210004 by Bromic.