BH0320003 - Heating Bromic - Free user manual and instructions
Find the device manual for free BH0320003 Bromic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Patio Heater |
| Brand | Bromic |
| Model | BH0320003 |
| Fuel Type | Propane (LPG) |
| Heat Output | Up to 12,000 BTU/hr |
| Heating Coverage | Up to 100 sq. ft. |
| Ignition Type | Electronic push-button |
| Material | Stainless steel and aluminum |
| Height | 87 inches (221 cm) |
| Base Diameter | 19 inches (48 cm) |
| Weight | 31 lbs (14 kg) |
| Cylinder Capacity | 20 lb propane tank |
| Safety Features | Tip-over shutoff, flame failure sensor |
| Certifications | ETL, CSA, approved for outdoor use |
| Assembly Required | Yes, tools included |
| Warranty | 1 year limited warranty |
| Cleaning | Wipe with damp cloth; avoid abrasive cleaners |
| Spare Parts | Available via Bromic authorized dealers |
| Manual Language | English (EN) |
Frequently Asked Questions - BH0320003 Bromic
What type of fuel does the Bromic BH0320003 use?
The Bromic BH0320003 uses propane (LPG) as fuel. It requires a standard 20 lb propane tank.
How do I light the heater?
Turn on the propane tank valve and then press the electronic push-button ignition. If the igniter fails, use a long lighter at the burner while turning the control knob to 'ON'.
What safety features does the heater have?
The heater includes a tip-over shutoff switch that automatically turns off the gas if the unit tips, and a flame failure sensor that cuts gas supply if the flame goes out.
Can I use this heater indoors?
No, the Bromic BH0320003 is designed for outdoor use only. Using it indoors can lead to carbon monoxide buildup and fire hazards.
How do I clean the heater?
Clean the exterior with a soft damp cloth. Do not use abrasive or corrosive cleaners. Ensure the heater is off and completely cool before cleaning.
What is the heat output coverage?
The heater provides up to 12,000 BTU/hr, covering an area up to 100 square feet, depending on weather conditions.
Is assembly required?
Yes, some assembly is required. The package includes a manual and necessary tools. Typical assembly time is about 20-30 minutes.
Where can I find spare parts?
Spare parts such as replacement burners, igniters, and hoses can be purchased through Bromic authorized dealers or by contacting customer support.
What should I do if the heater emits a strong gas smell?
Immediately turn off the gas supply, extinguish any flames, and move the heater to a well-ventilated area. Check for gas leaks using soapy water on connections. Do not operate until leak is fixed.
How long does the heater run on a full tank?
On a standard 20 lb propane tank at maximum output, the heater typically runs for approximately 6-8 hours, depending on the heat setting.
User questions about BH0320003 Bromic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual BH0320003 - Bromic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BH0320003 by Bromic.
USER MANUAL BH0320003 Bromic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bromic
Model : BH0320003
Category : Heating