Bromic

BH0420032 - Heating Bromic - Free user manual and instructions

Find the device manual for free BH0420032 Bromic in PDF.

📄 16 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Bromic BH0420032 - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Portable Electric Heater
Model BH0420032
Brand Bromic
Category Heating
Power Source Electric (240V, 50Hz)
Heat Output 2000W (adjustable)
Coverage Area Up to 20 m²
Dimensions (HxWxD) 600 x 200 x 200 mm
Weight 5.5 kg
Thermostat Adjustable
Safety Features Overheat protection, tip-over switch, cool-touch housing
Material Steel and plastic
Control Type Manual dial
Certification CE, UKCA
Warranty 2 years
Maintenance Wipe with dry cloth; do not use water
Repair Contact authorized service center

Frequently Asked Questions - BH0420032 Bromic

How do I install the Bromic BH0420032 heater?
Place the heater on a stable, flat surface away from flammable materials. Ensure the power cord is not damaged. Plug into a grounded outlet. Refer to the manual for detailed installation instructions.
What is the power consumption of this heater?
The heater consumes up to 2000W at maximum setting. It operates on 240V, 50Hz.
Can I use the heater in a bathroom?
No, this heater is not designed for damp or wet locations. Use only in dry indoor areas.
How do I clean the heater?
Unplug the heater and allow it to cool. Wipe the exterior with a soft, dry cloth. Do not use water, chemicals, or abrasives.
Does the heater have a timer?
No, the BH0420032 does not include a timer function. It has a manual on/off dial and an adjustable thermostat.
What room size is suitable for this heater?
The heater can effectively heat a room up to 20 m² (approximately 215 sq ft) when properly insulated.
Is the heater safe for use around children?
The heater includes a tip-over switch and overheat protection. However, always supervise children and keep them at a safe distance.
How do I reset the heater after overheating?
Unplug the heater from the power source. Wait 15-20 minutes for it to cool down. Plug it back in and turn it on. If it does not work, contact support.
Can I paint the heater?
No, painting the heater may damage its components and void the warranty. Keep it as is.
Where can I find spare parts for the BH0420032?
Spare parts are available through authorized Bromic dealers or the manufacturer. Contact Bromic customer service for assistance.

User questions about BH0420032 Bromic

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Heating in PDF format for free! Find your manual BH0420032 - Bromic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BH0420032 by Bromic.

USER MANUAL BH0420032 Bromic

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Bromic

Model : BH0420032

Category : Heating