ServerSwitchIQ SSIQ8-R2-I5-2S - Security Camera Razberi - Free user manual and instructions
Find the device manual for free ServerSwitchIQ SSIQ8-R2-I5-2S Razberi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed PoE Switch for Security Cameras |
| Number of Ports | 8 Gigabit PoE+ Ports + 2 SFP Slots |
| Power over Ethernet | IEEE 802.3at/af, up to 30W per port (total PoE budget 240W) |
| Dimensions (W x D x H) | 17.3 x 8.0 x 1.7 inches (440 x 204 x 44 mm) |
| Weight | 4.2 kg (9.3 lbs) |
| Power Input | AC 100-240V, 50/60Hz, 3.5A |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Humidity | 10% to 90% non-condensing |
| Network Protocols | IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.1Q, 802.1p, RSTP, IGMP |
| Management | Web-based, CLI, SNMP v1/v2c/v3, VLAN, QoS, Port Mirroring |
| Security | ACL, Port Security, 802.1X, HTTPS, SSH |
| Mounting | 19-inch rackmount kit included |
| Cooling | Fan-cooled, quiet operation |
| Maintenance | Clean with dry cloth; ensure vents free from dust |
| Certifications | CE, FCC, RoHS |
| Warranty | 3 years limited warranty |
| Spare Parts | Power supply unit, fan module, rackmount brackets (contact support) |
| Package Contents | Switch, power cord, rackmount kit, console cable, quick start guide |
| Max Power Consumption | 260W (with full PoE load) |
| Layer | Layer 2+ (with static routing) |
Frequently Asked Questions - ServerSwitchIQ SSIQ8-R2-I5-2S Razberi
How to reset the ServerSwitchIQ to factory defaults?
Press and hold the Reset button on the front panel for 10 seconds using a paperclip. The system will reboot with default settings.
What is the PoE budget of the SSIQ8-R2-I5-2S?
The total PoE budget is 240 watts, with up to 30W per port (PoE+). Ensure total camera power does not exceed this limit.
Can I use this switch with non-PoE devices?
Yes, all ports support standard Ethernet. PoE is only delivered when a powered device is detected. Non-PoE devices operate normally.
What is the maximum cable length for PoE?
For PoE and data, the maximum cable length is 100 meters (328 feet) per IEEE 802.3 standards.
How do I access the web management interface?
Connect your computer to one of the switch ports. Set your IP to 192.168.1.x (subnet 255.255.255.0). Open a browser and go to 192.168.1.1. Default username and password are 'admin' / 'admin'.
Does the switch support VLAN configuration?
Yes, it supports IEEE 802.1Q VLAN tagging with up to 256 VLAN groups. VLANs can be configured via web or CLI.
What should I do if the switch overheats?
Ensure adequate ventilation around the switch. Check that the fan is spinning. If the switch shuts down, let it cool for 30 minutes and restart. If overheating persists, contact support.
Can I use SFP modules for uplink?
Yes, the two SFP slots support 1G SFP modules (fiber or copper). Use compatible modules listed in the manual.
How to update the firmware?
Download the latest firmware from the Razberi support site. Log into the web interface, go to System > Firmware Upgrade, select the file, and upload. Do not power off during update.
Is the switch mountable in a standard 19-inch rack?
Yes, it comes with rackmount brackets and screws. It occupies 1U in a standard 19-inch rack.
User questions about ServerSwitchIQ SSIQ8-R2-I5-2S Razberi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual ServerSwitchIQ SSIQ8-R2-I5-2S - Razberi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ServerSwitchIQ SSIQ8-R2-I5-2S by Razberi.
USER MANUAL ServerSwitchIQ SSIQ8-R2-I5-2S Razberi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Razberi
Model : ServerSwitchIQ SSIQ8-R2-I5-2S
Category : Security Camera