LB200 - Uncategorized MCINTOSH - Free user manual and instructions
Find the device manual for free LB200 MCINTOSH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Amplifier |
| Dimensions (W x H x D) | 17.5 x 6 x 16 inches |
| Weight | 30 lbs |
| Power Supply | 120V AC, 60Hz |
| Output Power | 200 watts per channel (8 ohms) |
| Input Impedance | 8 ohms |
| Analog Inputs | 5 line-level, 1 phono (MM) |
| Speaker Outputs | 2 pairs (A and B) |
| Preamp Outputs | 1 pair (RCA) |
| Volume Control | Rotary knob with precision detents |
| Input Selector | Rotary switch |
| Frequency Response | 10 Hz - 100 kHz (±0.5 dB) |
| Signal-to-Noise Ratio | 100 dB (A-weighted) |
| Total Harmonic Distortion | <0.005% |
| Chassis Material | Brushe d aluminum and glass |
| Cooling | Passive heatsink, fanless |
| Power Consumption | 250W (idle), 600W (max) |
| Remote Control | Infrared (included) |
| Warranty | 3 years (parts and labor) |
| Spare Parts Availability | Authorized service centers |
| Cleaning Instructions | Wipe with dry, soft cloth; avoid liquids |
| Safety Notes | Do not open; unplug during lightning storms |
Frequently Asked Questions - LB200 MCINTOSH
How do I connect my speakers to the LB200?
Use the speaker outputs on the rear panel. Connect the positive terminal to the red binding post and negative to the black. Ensure impedance is 8 ohms or higher.
What is the power output of the LB200?
The LB200 delivers 200 watts per channel into 8 ohms.
Can I use a subwoofer with this amplifier?
Yes, connect your subwoofer to the preamp outputs using an RCA cable. You may need a crossover.
How do I clean the front panel and chassis?
Use a soft, dry cloth to gently wipe the surface. Avoid water, cleaning solvents, or abrasive materials.
Is the LB200 compatible with a turntable?
Yes, it has a dedicated phono input for moving magnet (MM) cartridges.
What is the warranty period?
The LB200 comes with a 3-year warranty covering parts and labor. Contact an authorized dealer for service.
Does the amplifier have a remote control?
Yes, an infrared remote is included for volume and input selection.
What are the dimensions of the LB200?
The dimensions are approximately 17.5 x 6 x 16 inches (width x height x depth).
Can I stack other components on top of the LB200?
It is not recommended to stack equipment on top because the amplifier requires ventilation. Leave at least 6 inches of space above.
How do I replace the power fuse?
Disconnect the power cord. Locate the fuse holder near the AC inlet. Replace with a fuse of the same type and rating (e.g., 5A 250V). If it blows again, consult a technician.
User questions about LB200 MCINTOSH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual LB200 - MCINTOSH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LB200 by MCINTOSH.
USER MANUAL LB200 MCINTOSH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MCINTOSH
Model : LB200
Category : Uncategorized