MPC500 - Uncategorized MCINTOSH - Free user manual and instructions
Find the device manual for free MPC500 MCINTOSH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power Controller / AC Power Sequencer |
| Brand | McIntosh |
| Model | MPC500 |
| Number of AC Outlets | 10 (switched), 2 (unswitched) |
| Maximum Current Capacity | 15A (total), 10A per outlet (switched) |
| Voltage Rating | 100-240V AC, 50/60Hz |
| Power Sequencing | Adjustable delay (0.5 to 10 seconds) per zone |
| Surge Protection | 1430 Joules, UL 1449 rated |
| Dimensions (W x H x D) | 44.5 cm x 13.3 cm x 45.7 cm (17.5" x 5.25" x 18") |
| Weight | 14.1 kg (31 lbs) |
| Rack Mountable | Yes, 3U height, includes rack ears |
| Remote Trigger Input | 12V DC, 3.5mm mono jack |
| Front Panel Display | Blue LCD with voltage, current, and status |
| Control Interface | Front push buttons, IR remote (included) |
| Cleaning Instructions | Use a soft, dry cloth. Avoid solvents and abrasives. |
| Safety Precautions | Do not expose to moisture. Ensure proper ventilation. Unplug before cleaning. |
| Spare Parts Availability | Contact McIntosh authorized service centers for replacements. |
| Reparability | Repairs should be performed by qualified technicians only. |
| General Information | Designed for home theater and high-end audio systems. Provides clean, sequenced power. |
Frequently Asked Questions - MPC500 MCINTOSH
How do I reset the MPC500?
Press and hold the Power button for 5 seconds until the display flashes, then release. The unit will reboot.
Can I daisy-chain multiple MPC500 units?
Yes, use the Trigger Out jack to connect to another unit's Trigger In for sequential power-up.
What is the maximum load per outlet?
Each switched outlet can handle up to 10A (resistive) and the total unit load is 15A.
How do I set the power-on delay?
Enter the setup menu by pressing Menu, then use arrow keys to adjust delay from 0.5 to 10 seconds per zone.
The display shows 'Overload'. What should I do?
Reduce the total connected load. The MPC500 will shut off outlets to protect itself. Unplug some devices and press Reset.
Can I control the MPC500 via RS-232?
Yes, the MPC500 has a DB9 RS-232 port for integration with home automation systems.
What type of power cord does it use?
It uses a standard IEC C14 inlet. A C13 to wall plug cord is included.
How do I update the firmware?
Firmware updates are done via the USB-B port on the rear. Download the latest firmware from McIntosh's website and follow included instructions.
The remote control is not working. What can I do?
Replace the batteries (2x AAA). Ensure the IR sensor on the front panel is not blocked. Check if remote is paired by pointing it at the unit and pressing any button.
Is the MPC500 compatible with 220V?
Yes, it automatically accepts 100-240V AC 50/60Hz. No voltage switching needed.
User questions about MPC500 MCINTOSH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual MPC500 - MCINTOSH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MPC500 by MCINTOSH.
USER MANUAL MPC500 MCINTOSH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MCINTOSH
Model : MPC500
Category : Uncategorized