LB100 - Audio Receiver MCINTOSH - Free user manual and instructions
Find the device manual for free LB100 MCINTOSH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Audio Receiver |
| Marque | McIntosh |
| Modèle | LB100 |
| Dimensions (L x H x P) | 44.5 cm x 15.2 cm x 40.6 cm |
| Poids | 15.9 kg |
| Alimentation | 120 V / 230 V, 50/60 Hz (commutable) |
| Consommation électrique | 500 W |
| Puissance de sortie | 100 W par canal (8 ohms) |
| Entrées audio | Phono (MM), CD, Aux, Tuner, Tape |
| Sorties audio | Haut-parleurs A/B, Casque, Préampli, Enregistrement |
| Radio | AM/FM avec syntoniseur numérique |
| Bandes de fréquences | FM : 88-108 MHz, AM : 530-1710 kHz |
| Contrôle de tonalité | Basses, Aigus, Balance |
| Rapport signal/bruit | > 90 dB |
| Distorsion harmonique totale | < 0.05 % |
| Matériau du châssis | Aluminium brossé avec verre |
| Entretien et nettoyage | Nettoyer avec un chiffon doux et sec. Éviter les produits chimiques. |
| Sécurité | Ne pas exposer à l'humidité. Débrancher avant nettoyage. |
| Pièces détachées | Disponibles auprès des centres de service McIntosh agréés. |
| Réparabilité | Conçu pour être réparable avec des composants standard. |
| Pays de fabrication | États-Unis |
| Garantie | 3 ans (pièces et main-d'œuvre) |
Frequently Asked Questions - LB100 MCINTOSH
How do I connect speakers to the McIntosh LB100?
Connect the speakers to the A or B terminals on the back panel. Ensure the impedance is 8 ohms or higher. Use the speaker selector switch on the front panel to choose the output.
What is the maximum power output of the LB100?
The LB100 delivers 100 watts per channel into 8 ohms, with both channels driven.
How do I clean the McIntosh LB100?
Use a soft, dry cloth to wipe the surfaces. Do not use any solvents or abrasive cleaners. Unplug the unit before cleaning.
Can I use the LB100 with a turntable?
Yes, the LB100 has a dedicated phono input for moving magnet (MM) cartridges. Connect your turntable to the Phono input and ground wire.
How do I reset the FM tuner presets?
Press and hold the Memory button for 3 seconds until the display flashes. Then use the tuning knob to select a preset and press Memory again to store.
What type of antenna does the LB100 require?
For FM, use a 75-ohm coaxial antenna or a dipole. For AM, connect a loop antenna (included).
Is it safe to leave the LB100 on all the time?
While the unit is designed for extended use, it is recommended to turn it off when not in use to save energy and prolong component life.
How do I connect external devices like a CD player?
Use the CD, Aux, or Tape inputs on the back panel. Connect the audio outputs of your external device to the corresponding inputs using RCA cables.
What should I do if the unit does not power on?
Check the power cord connection and ensure the outlet is working. Verify the voltage selector is set correctly. If the issue persists, contact McIntosh support.
Where can I find replacement parts for the LB100?
Replacement parts are available through authorized McIntosh service centers. Contact McIntosh customer service for assistance.
User questions about LB100 MCINTOSH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio Receiver in PDF format for free! Find your manual LB100 - MCINTOSH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LB100 by MCINTOSH.
USER MANUAL LB100 MCINTOSH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MCINTOSH
Model : LB100
Category : Audio Receiver