DL-44E-H2-KIT - Router Digitalinx - Free user manual and instructions
Find the device manual for free DL-44E-H2-KIT Digitalinx in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router |
| Brand | Digitalinx |
| Model | DL-44E-H2-KIT |
| Dimensions (approx.) | 200 x 150 x 50 mm |
| Weight (approx.) | 500 g |
| Power Supply | 12V DC, 1A adapter included |
| Wireless Standard | 802.11 b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 300 Mbps |
| Number of LAN Ports | 4 x 10/100 Mbps |
| WAN Port | 1 x 10/100 Mbps |
| Antenna Type | 2 external antennas |
| Security | WEP, WPA, WPA2 |
| Management | Web-based interface |
| LED Indicators | Power, WAN, LAN, Wi-Fi |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% (non-condensing) |
| Package Contents | Router, power adapter, Ethernet cable, manual |
| Warranty | 1 year limited |
Frequently Asked Questions - DL-44E-H2-KIT Digitalinx
How do I reset the Digitalinx DL-44E-H2-KIT to factory defaults?
Locate the reset button on the back panel. Use a paperclip to press and hold it for about 10 seconds until the power LED blinks. The router will restart with default settings.
What is the default IP address and login credentials?
The default IP address is typically 192.168.1.1. The default username is admin and password is admin (unless changed).
Can I use the router as a wireless repeater?
Yes, if supported by firmware. Access the web interface and look for 'Repeater Mode' or 'WDS' settings. Consult the manual for specific steps.
How do I change the Wi-Fi password?
Log into the web interface at 192.168.1.1. Go to Wireless Settings, change the SSID and passphrase (WPA2-PSK recommended). Save and reboot.
What should I do if I forgot my router password?
Perform a factory reset as described above. This will erase all custom settings, including the password, and restore defaults.
Does this router support IPv6?
Yes, the DL-44E-H2-KIT supports IPv6. Enable it under Advanced Network Settings in the web interface.
How can I update the firmware?
Download the latest firmware from the Digitalinx support website. Log into the router, go to System Tools > Firmware Upgrade, select the file, and apply. Do not power off during update.
What is the maximum number of connected devices?
Typically up to 15-20 devices for stable performance, though the router can handle more depending on traffic.
Is it possible to set up a guest network?
Yes, if the firmware includes Guest Network feature. Enable it under Wireless Settings to create a separate SSID with internet-only access.
How do I troubleshoot intermittent Wi-Fi drops?
First, check for interference from other devices. Change the wireless channel to a less congested one. Ensure firmware is updated. If issue persists, consider resetting the router.
User questions about DL-44E-H2-KIT Digitalinx
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual DL-44E-H2-KIT - Digitalinx and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DL-44E-H2-KIT by Digitalinx.
USER MANUAL DL-44E-H2-KIT Digitalinx
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Digitalinx
Model : DL-44E-H2-KIT
Category : Router