NETWORK-M2 - NAS Tripp Lite - Free user manual and instructions
Find the device manual for free NETWORK-M2 Tripp Lite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Attached Storage (NAS) |
| Brand | Tripp Lite |
| Model | NETWORK-M2 |
| Form Factor | Rackmount 2U |
| Dimensions (W x D x H) | 17.2 x 19.8 x 3.5 inches |
| Weight | 22 lbs (10 kg) |
| Power Supply | 100-240V AC, 50/60 Hz, 300W |
| Number of Drive Bays | 8 (2.5-inch or 3.5-inch SATA) |
| RAID Support | RAID 0, 1, 5, 6, 10, JBOD |
| Processor | Intel Atom C2550 @ 2.4 GHz |
| Memory | 8 GB DDR3 (expandable to 16 GB) |
| Network Interfaces | 2 x Gigabit Ethernet (RJ45) |
| USB Ports | 2 x USB 3.0, 2 x USB 2.0 |
| Max Storage Capacity | Up to 128 TB (with 16 TB drives) |
| Operating System | Proprietary NAS OS based on Linux |
| File Sharing Protocols | SMB/CIFS, NFS, AFP, FTP, WebDAV |
| Remote Access | Via web interface and mobile apps |
| Cooling Fans | 2 x 80mm, variable speed |
| Maintenance | Clean dust from vents monthly; update firmware regularly |
| Safety | Ensure proper ventilation; do not block air intake |
| Spare Parts / Repairability | Hard drives, power supply, fans are user-replaceable |
Frequently Asked Questions - NETWORK-M2 Tripp Lite
How do I set up the NETWORK-M2 for the first time?
Connect the NAS to your network via Ethernet, plug in power, and follow the initial setup wizard accessible through the web interface at the device's IP address. You will need to configure RAID, create shared folders, and set up user accounts.
What RAID levels are supported?
The NETWORK-M2 supports RAID 0, 1, 5, 6, 10, and JBOD. Choose RAID 5 for a balance of performance and redundancy, or RAID 1 for maximum data protection with fewer drives.
Can I access my files remotely?
Yes, you can enable remote access via the web interface. The NAS supports secure remote connections using HTTPS and also offers mobile apps for iOS and Android to access files on the go.
How do I replace a failed hard drive?
The NETWORK-M2 supports hot-swappable drives. Simply remove the failed drive from its bay, insert a new drive of the same or larger size, and the system will automatically rebuild the RAID array if configured appropriately.
What file systems are supported?
The NAS uses ext4 for internal volumes but can read and write external drives formatted as NTFS, FAT32, HFS+, or exFAT when connected via USB.
Is the NETWORK-M2 compatible with Time Machine?
Yes, you can configure a shared folder as a Time Machine backup destination via the NAS settings. Ensure the folder is set to serve as a network backup target for macOS.
How do I update the firmware?
Log in to the web interface, go to System Settings > Firmware Update. You can check for updates online or upload a downloaded firmware file manually. Always backup your configuration before updating.
Can I use different sized drives in the same RAID array?
Yes, but the total usable capacity will be limited by the smallest drive in the array. For optimal performance and capacity, it is recommended to use identical drives.
What is the default login for the web interface?
The default username is 'admin' with password 'admin'. You will be prompted to change this upon first login for security reasons.
How do I perform a factory reset?
To reset to factory defaults, press and hold the reset button on the back panel for 10 seconds while the device is powered on. This will revert all settings and erase the configuration.
User questions about NETWORK-M2 Tripp Lite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your NAS in PDF format for free! Find your manual NETWORK-M2 - Tripp Lite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NETWORK-M2 by Tripp Lite.