OpenVox

AE1610P30 - Soundcard OpenVox - Free user manual and instructions

Find the device manual for free AE1610P30 OpenVox in PDF.

📄 15 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice OpenVox AE1610P30 - page 8
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypePCIe Analog Telephony Interface Card
ModelAE1610P30
Ports16 Analog Ports (8 FXS + 8 FXO)
InterfacePCI Express x1
Dimensions14.5 x 6.5 x 2.0 cm (5.7 x 2.6 x 0.8 in)
Weight120 g (4.2 oz)
Power Consumption15W (via PCIe slot)
Operating Temperature0°C to 50°C (32°F to 122°F)
Key FunctionsVoice over IP gateway, echo cancellation, caller ID support, programmable tone generation
MaintenanceKeep in dry environment; clean with antistatic cloth
SafetyESD sensitive; handle with grounded wrist strap
Spare PartsNot user-replaceable; contact support for defective units
Operating SystemsLinux (Asterisk, FreePBX), Windows (limited)
ComplianceFCC, CE, RoHS

Frequently Asked Questions - AE1610P30 OpenVox

How do I install the OpenVox AE1610P30 card?
Insert the card into a free PCIe x1 slot, secure with screw, and install the appropriate drivers from the OpenVox website. Ensure the system is powered off and grounded.
Which operating systems are supported?
The card is primarily designed for Linux with Asterisk and FreePBX. Windows drivers are available for basic functionality.
What is the maximum number of calls supported?
With 16 analog ports (8 FXS + 8 FXO), the card can handle up to 16 simultaneous calls depending on system load.
Does the card support echo cancellation?
Yes, the AE1610P30 includes hardware echo cancellation compliant with G.168 standards.
Can I use the card with a PBX other than Asterisk?
The card uses standard interfaces and may work with other PBX software, but full support is optimized for Asterisk and FreePBX.
What are the LED indicators on the bracket?
There are two LEDs per port: green for line status (off-hook/on-hook) and amber for signaling activity.
How do I troubleshoot if the card is not detected?
Check that the card is fully seated, PCIe power is available, and drivers are loaded. Use lspci in Linux to verify enumeration.
Is hot-swap supported?
No, the card is not hot-swappable. Always power off the system before inserting or removing.
Where can I find the latest drivers and firmware?
Drivers are available on the OpenVox support portal at support.openvox.com. Firmware updates require a compatible upgrade tool.
What is the warranty period?
Standard warranty is 24 months from date of purchase. Extended warranties are available through OpenVox.

User questions about AE1610P30 OpenVox

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Soundcard in PDF format for free! Find your manual AE1610P30 - OpenVox and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AE1610P30 by OpenVox.

USER MANUAL AE1610P30 OpenVox

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : OpenVox

Model : AE1610P30

Category : Soundcard