BN-NVR/16NX-S/NDAA - Video recorder Bolide - Free user manual and instructions
Find the device manual for free BN-NVR/16NX-S/NDAA Bolide in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Video Recorder (NVR) |
| Brand | Bolide |
| Model | BN-NVR/16NX-S/NDAA |
| Channel Count | 16 Channels |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Max Recording Resolution | 12MP (4K Ultra HD) per channel |
| Hard Drive Support | 2 SATA HDDs up to 10TB each (max 20TB) |
| HDMI Output | 1x HDMI 2.0 (up to 3840x2160) |
| VGA Output | 1x VGA (up to 1920x1080) |
| Audio Support | 1x Audio In, 1x Audio Out (RCA) |
| Network Interface | 1x Gigabit Ethernet RJ-45 |
| PoE Support | Built-in 16-port PoE switch (IEEE 802.3af/at) |
| PoE Power Budget | Total 200W (max 30W per port) |
| Remote Access | Web browser, iOS/Android app (Bolide Connect) |
| Recording Modes | Continuous, Motion, Alarm, Schedule |
| Playback | Simultaneous multi-channel, search by date/time/motion |
| Power Supply | AC 100-240V, 50/60Hz, 1.5A (internal PSU) |
| Power Consumption | ≤ 250W (with HDDs and PoE load) |
| Dimensions (WxDxH) | 442 x 315 x 44 mm (1U rackmount) |
| Weight | Approx. 3.5 kg (without HDDs) |
| Operating Temperature | 10°C to 40°C (50°F to 104°F) |
| Compliance | NDAA (National Defense Authorization Act) |
| Warranty | 2 years limited warranty |
Frequently Asked Questions - BN-NVR/16NX-S/NDAA Bolide
How do I set up the NVR for the first time?
Connect the NVR to your network via Ethernet, plug in the PoE cameras into the numbered ports, power on the unit. Use the Bolide Connect app or web browser to access the guide. Default IP is usually 192.168.1.108.
What hard drives are compatible with this NVR?
Supports 3.5-inch SATA HDDs of any capacity up to 10TB each, for a total of 20TB. Use surveillance-rated drives (e.g., WD Purple, Seagate SkyHawk) for continuous recording.
Can I access the NVR remotely from my smartphone?
Yes. Download the Bolide Connect app for iOS or Android. Add the device using its serial number or IP address. Ensure port forwarding is enabled on your router (default ports: 80, 554, 37777).
How many cameras can I connect?
You can connect up to 16 PoE cameras directly to the built-in PoE ports. Additional IP cameras can be added via the network if the NVR's maximum channel count is not exceeded.
What is the maximum recording resolution?
Each channel can record up to 12MP (4K) at lower frame rates. For 4K cameras, the NVR supports H.265+ compression to save storage.
How do I back up recorded footage?
Insert a USB flash drive or external HDD into the USB port. In the playback menu, select the time range and click 'Export'. Footage can be saved in AVI or DAV format.
Is the NVR compatible with ONVIF cameras?
Yes, it supports ONVIF Profile S/G/T and many third-party IP cameras. Go to Camera Registration, choose 'ONVIF' and enter the camera's credentials.
Can I receive alerts on motion detection?
Yes. Enable motion detection in the camera settings. The NVR can send push notifications via the app and email alerts with snapshots.
What maintenance does the NVR require?
Periodically check the hard drive health via the HDD Management menu. Clean the dust from vents and fans annually. Update firmware from the support website.
How do I reset the NVR to factory defaults?
Press and hold the Reset button on the rear panel for 10 seconds while the unit is powered on. Or via web interface: Settings > System > Default.
User questions about BN-NVR/16NX-S/NDAA Bolide
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video recorder in PDF format for free! Find your manual BN-NVR/16NX-S/NDAA - Bolide and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BN-NVR/16NX-S/NDAA by Bolide.