FLS26Z2GKW - Refrigerator FRIGIDAIRE - Free user manual and instructions
Find the device manual for free FLS26Z2GKW FRIGIDAIRE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Side-by-Side Refrigerator |
| Brand | Frigidaire |
| Model | FLS26Z2GKW |
| Total Capacity | 26 cu. ft. |
| Refrigerator Capacity | 14.8 cu. ft. |
| Freezer Capacity | 11.2 cu. ft. |
| Dimensions (H x W x D) | 70" x 36" x 33.5" |
| Weight | 280 lbs |
| Power Supply | 120V, 60Hz, 15A |
| Energy Star Certified | Yes |
| Ice Maker | Built-in, Ice & Water Dispenser |
| Water Filter | Puresource Ultra II (WF2CB) |
| Shelving Type | SpillProof Glass Shelves |
| Crisper Drawers | Gallon Storage, Humidity-Controlled |
| Door Style | Storage with Gallon Bins |
| Lighting | LED Interior Lighting |
| Temperature Control | Electronic Digital Controls |
| Defrost | Automatic |
| Noise Level | Approx 38 dB |
| Installation | Freestanding, Reversible Door |
| Maintenance | Clean condenser coils annually; replace water filter every 6 months |
| Safety Features | Child lock on dispenser; automatic alarm for door open |
| Spare Parts Availability | Filters, shelves, bins, and ice maker parts available from Frigidaire |
Frequently Asked Questions - FLS26Z2GKW FRIGIDAIRE
How do I install the water line for the ice maker?
Connect a copper or braided flexible water supply line to the refrigerator's water inlet valve at the back. Use a shut-off valve on the nearest cold water pipe. Tighten connections and flush 2-3 gallons before use.
What is the recommended temperature setting for the refrigerator and freezer?
Set the refrigerator to 37°F (3°C) and the freezer to 0°F (-18°C). Adjust as needed based on usage and ambient temperature.
How often should I replace the water filter?
Replace the Puresource Ultra II filter every 6 months or when the indicator light turns on. Use only genuine Frigidaire filters.
Why is my ice maker not producing ice?
Check that the water supply is connected and the shut-off valve is open. Ensure the ice maker arm is not blocked. If the freezer is too warm (above 10°F), it will not produce ice. Also, new installations may take up to 24 hours.
How do I clean the condenser coils?
Unplug the refrigerator and remove the front grille at the bottom. Use a vacuum with a brush attachment to clean the coils gently. Do not use water or bend the fins. Replace the grille and plug back in.
What does the 'Door Open' alarm mean?
The alarm sounds if either door is left open for more than 3 minutes. Close the door firmly to stop the alarm. This prevents food spoilage and energy waste.
Can I reverse the door swing?
Yes, the doors are reversible. Refer to the manual for step-by-step instructions. You may need a screwdriver and wrench to move hinges and handles.
How do I adjust the humidity in the crisper drawers?
Slide the humidity control slider to the left (higher humidity) for fruits and vegetables, or to the right (lower humidity) for greens that wilt easily. This helps extend freshness.
Why is water pooling on the floor?
Check the water filter for leaks. Ensure the drain tube behind the refrigerator is not disconnected. Also, inspect the ice maker fill cup for cracks. Tighten connections as needed.
How do I reset the water filter indicator?
Press and hold the 'Water Filter Reset' button on the control panel for 3 seconds until the indicator light turns off. Do this after replacing the filter.
User questions about FLS26Z2GKW FRIGIDAIRE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Refrigerator in PDF format for free! Find your manual FLS26Z2GKW - FRIGIDAIRE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FLS26Z2GKW by FRIGIDAIRE.