Q: How do I switch my ice maker from crushed ice mode to cube mode?

To switch from Crush (crushed ice) mode to Cubes (regular ice) mode, it's very simple: Press the Cube button on the control panel of your GRSC2352AF. A light indicator will turn on above the button to confirm that the cube mode is now active. You can switch between the two modes at any time by pressing the corresponding button (Crush or Cube). The light indicator always shows the currently active mode.

Question 1

The ice mode produces crushed ice

Accepted Answer

Your Frigidaire refrigerator GRSC2352AF has two distinct ice dispensing modes. If you are getting crushed ice when you pressed the Cube button, here’s how to fix the issue.

First, check the selected button: Press the Cube button (cube ice). You will see a light turn on above the active button. The Crush button (crushed ice) should remain off. If the wrong mode is activated, the button may be stuck or there may be an issue with the mode selector.

Clean the buttons: The buttons on the control panel can sometimes get stuck due to moisture or residue. Use a soft, damp cloth to gently clean the Cube and Crush buttons. Ensure that each button presses down and pops back up correctly when pressed.

Check the temperature settings: Proper ice formation also depends on the freezer temperature. Make sure your freezer is set to an appropriate temperature (between -6°C and -21°C depending on your model). A temperature that is too high can affect the quality and type of ice produced.

Let it rest and restart: After cleaning, let the appliance run for 24 hours for the dispensing mechanism to produce fresh ice. Some residue may block the selector and will disappear over time.

Reset the ice bin: Temporarily turn off the ice maker, completely empty the ice bin in place, and discard any old ice. Clean the bin with warm water, let it dry completely, then reactivate the ice maker. This resets the dispensing mechanism.

If after these steps the problem persists, the internal mode selector may be defective. In this case, the switching mechanism between Cube and Crush requires intervention from Frigidaire technical service at 1-800-374-4432 (USA) or 1-800-265-8352 (Canada).

Question 2

How do I switch my ice maker from crushed ice mode to cube mode?

Accepted Answer

To switch from Crush (crushed ice) mode to Cubes (regular ice) mode, it's very simple:

Press the Cube button on the control panel of your GRSC2352AF.
A light indicator will turn on above the button to confirm that the cube mode is now active.

You can switch between the two modes at any time by pressing the corresponding button (Crush or Cube). The light indicator always shows the currently active mode.

Question 3

What should I do if the start button on my Frigidaire FGHD2491LB refrigerator is not responding?

Accepted Answer

If the START/CANCEL button on your Frigidaire Gallery FGHD2491LB dishwasher is not responding, here are some solutions to try before contacting a technician.

First, check the power supply. Make sure the appliance is properly plugged in and that your home's circuit breaker has not tripped. Test the outlet with another appliance to confirm it is working. If the breaker has tripped, reset it and restart the dishwasher.

Check the child lock feature. This model has a lock function that disables all buttons to prevent children from changing the settings. To disable it, press and hold the DELAY START button for 3 seconds until the lock indicator goes off. This is often the cause of a button that appears unresponsive.

Ensure the door is properly closed and locked. The START/CANCEL pad only works if the door is completely closed and properly latched. Close the door firmly until you hear a click.

Unplug the appliance for 5 minutes. This resets the electronic control board. Then plug it back in and try to restart a cycle.

Check for error codes displayed. If the screen shows "Er" or "CE", there is an electronic malfunction. In this case, contact Frigidaire customer service at 1-800-944-9044 (USA) or 1-800-265-8352 (Canada) for technical assistance or to locate a certified technician.

If the button still does not respond after these checks and no error code appears, the problem is likely due to a fault in the control panel or the button itself, requiring the intervention of a specialized technician.

User manual FRIGIDAIRE Refrigerator : user manuals and guides in PDF

Models FRIGIDAIRE Refrigerator most viewed

Other categories FRIGIDAIRE

Recent questions about Refrigerator FRIGIDAIRE