CCR-1200 QCL - Effects machine Eurolite - Free user manual and instructions
Find the device manual for free CCR-1200 QCL Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Effects Machine (Fog Machine) |
| Brand | Eurolite |
| Model | CCR-1200 QCL |
| Dimensions (L x W x H) | approx. 450 x 250 x 250 mm |
| Weight | approx. 5.5 kg |
| Power Supply | AC 120V/240V, 50/60 Hz |
| Power Consumption | 1200 W |
| Heater Power | 1200 W |
| Fluid Tank Capacity | 3 L |
| Fog Output | approx. 200 m³/min |
| Warm-up Time | approx. 4 minutes |
| Control | Wired remote control (included) |
| Functions | Continuous output, timer mode, remote control activation |
| Maintenance | Clean with neutral detergent; avoid water ingress |
| Safety Features | Thermal fuse, auto shut-off on overheating |
| Spare Parts / Repair | Replaceable heater, pump, and fuse; contact service center |
| General Information | For indoor use only; use water-based fog fluid; CE compliant |
Frequently Asked Questions - CCR-1200 QCL Eurolite
What type of fog fluid should I use?
It is recommended to use water-based fog fluid specifically designed for fog machines. Do not use oil-based or flammable fluids.
How do I clean the fog machine?
Regular cleaning prevents clogging. Run a solution of distilled water and mild detergent through the system, then flush with clean water. Refer to the manual for detailed instructions.
What does the remote control do?
The included wired remote allows you to activate and deactivate fog output from a distance. Some models may also have a timer function.
How long does it take to warm up?
The warm-up time is approximately 4 minutes. The machine will indicate readiness via the status LED.
Can I use this machine outdoors?
This unit is designed for indoor use only. Exposure to wind, rain, or extreme temperatures may damage the machine and pose safety risks.
What is the maximum fog output?
The maximum fog output is approximately 200 m³ per minute, measured at the nozzle. Output varies with fluid and settings.
How do I replace the fuse?
Disconnect the machine from power. Locate the fuse holder near the power inlet. Use a screwdriver to open it and replace with a fuse of the same rating (e.g., 10A).
What should I do if the machine stops producing fog?
Check if the fluid tank is empty, if the machine has reached operating temperature, and if the heater or pump is functioning. If the problem persists, contact customer support.
Is the machine safe to use around people?
Yes, when used with high-quality water-based fog fluid, it is non-toxic. However, avoid direct inhalation of dense fog and ensure adequate ventilation.
What are the storage requirements?
Store the machine in a dry, dust-free environment between 5°C and 45°C. Empty the fluid tank before long-term storage.
User questions about CCR-1200 QCL Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effects machine in PDF format for free! Find your manual CCR-1200 QCL - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CCR-1200 QCL by Eurolite.