VML406AH - Circuit Breaker HAGER - Free user manual and instructions
Find the device manual for free VML406AH HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Miniature Circuit Breaker (MCB) |
| Brand | Hager |
| Model | VML406AH |
| Number of Poles | 4 |
| Rated Current (In) | 6 A |
| Rated Voltage | 230/400 V AC |
| Breaking Capacity | 10 kA (IEC 60898-1) |
| Tripping Characteristic | Type C |
| Mounting Type | DIN rail (35 mm) |
| Width (per pole) | 18 mm |
| Total Width | 72 mm (4 x 18 mm) |
| Weight | Approx. 0.3 kg |
| Degree of Protection | IP20 (front face) |
| Ambient Temperature Range | -5 °C to +40 °C |
| Conformity Standards | IEC 60898-1, EN 60898-1 |
| Maintenance | No periodic maintenance required. Keep clean and dry. |
| Cleaning | Wipe with a dry, soft cloth. Do not use solvents or abrasives. |
| Safety | Install by qualified personnel only. Disconnect power before handling. |
| Spare Parts | Contact Hager authorized distributors for replacement parts. |
| Reparability | Non-repairable. Replace entire unit if faulty. |
Frequently Asked Questions - VML406AH HAGER
What is the rated current of the Hager VML406AH circuit breaker?
The rated current (In) is 6 A.
How many poles does this MCB have?
It is a 4-pole circuit breaker.
What is the breaking capacity of the VML406AH?
The breaking capacity is 10 kA according to IEC 60898-1.
What type of tripping characteristic does it have?
It has a Type C tripping characteristic, suitable for moderate inrush currents.
Can this circuit breaker be used for both single-phase and three-phase applications?
Yes, with its 4 poles, it can be used in single-phase (2 poles) or three-phase (3 or 4 poles) systems up to 400 V.
What is the mounting method for the VML406AH?
It mounts on a standard 35 mm DIN rail.
What is the width of this circuit breaker?
Each pole is 18 mm wide, so the total width is 72 mm.
Is the VML406AH suitable for residential use?
Yes, it is commonly used in residential and light commercial distribution boards.
How do I clean the circuit breaker?
Use a dry, soft cloth to wipe the exterior. Avoid water, solvents, and abrasive cleaners.
What should I do if the circuit breaker trips frequently?
Check for overload or short circuit in the connected circuit. If the problem persists, consult a qualified electrician.
User questions about VML406AH HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Circuit Breaker in PDF format for free! Find your manual VML406AH - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VML406AH by HAGER.