LAGAS-2800 - Pressure washer Truper - Free user manual and instructions
Find the device manual for free LAGAS-2800 Truper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Pressure Washer |
| Model | LAGAS-2800 |
| Brand | Truper |
| Maximum Pressure | 2800 PSI |
| Flow Rate | 2.0 GPM (7.6 L/min) |
| Power Source | Electric, 120V ~ 60Hz |
| Motor Power | 1800 W (2.4 HP) |
| Dimensions (L x W x H) | 15.7 x 11.8 x 10.6 in (400 x 300 x 270 mm) |
| Weight | 28.7 lb (13 kg) |
| Hose Length | 20 ft (6 m) |
| Power Cord Length | 35 ft (10.7 m) |
| Nozzle Types | Adjustable spray wand with 5 quick-connect nozzles (0°, 15°, 25°, 40°, soap) |
| Detergent Tank | 0.5 gal (1.9 L) built-in |
| Pressure Adjustment | Variable pressure regulator dial |
| Total Stop System (TSS) | Yes, auto shut-off when trigger not pressed |
| Thermal Relief Valve | Yes, protects pump from overheating |
| Maintenance | Clean inlet filter regularly; use pump saver for storage |
| Safety Features | GFCI plug, trigger lock, pressure relief valve |
| Spare Parts Availability | Nozzles, hoses, trigger gun, pump seals available from Truper |
| Warranty | 1 year limited |
Frequently Asked Questions - LAGAS-2800 Truper
What type of oil does the pump use?
The pump is pre-lubricated and sealed; no oil change is required. If a leak occurs, use SAE 30 non-detergent oil.
Can I use hot water with this pressure washer?
No, this model is designed for cold water only. Using hot water can damage the pump and seals.
How do I connect the garden hose?
Attach a standard garden hose (3/4 inch) to the brass inlet fitting. Ensure the water supply is turned on and the hose is free of kinks before starting.
The pressure washer won't start. What should I check?
First, ensure the power cord is plugged into a working GFCI outlet. Check the circuit breaker. Also confirm the trigger gun is in the 'off' position and the water supply is on.
How do I use the detergent function?
Fill the built-in detergent tank with a suitable pressure washer soap. Attach the black low-pressure nozzle (soap nozzle). Turn on the machine and apply soap from bottom to top.
Why is the pressure fluctuating?
Fluctuating pressure can be caused by a clogged nozzle, air in the system, or a worn pump seal. Try cleaning the nozzle with a pin, and run the machine with water for 30 seconds to purge air.
How do I store the pressure washer for winter?
Drain all water from the pump, hose, and spray gun. Use a pump saver/antifreeze winterizing kit to protect internal components. Store in a dry, frost-free area.
Can I use bleach or other chemicals?
Only use biodegradable pressure washer detergents specifically formulated for high-pressure washers. Avoid bleach, acidic, or abrasive cleaners as they may damage the unit.
How often should I clean the inlet filter?
Clean the inlet filter every 5-10 hours of use or whenever you notice reduced water flow. Remove the filter from the water inlet and rinse with clean water.
Where can I purchase replacement parts?
Replacement parts such as nozzles, hoses, trigger gun, and pump seals are available through Truper customer service or authorized dealers. Check the manual for part numbers.
User questions about LAGAS-2800 Truper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual LAGAS-2800 - Truper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LAGAS-2800 by Truper.
USER MANUAL LAGAS-2800 Truper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Truper
Model : LAGAS-2800
Category : Pressure washer