MBB78-E - Uncategorized Micro Matic - Free user manual and instructions
Find the device manual for free MBB78-E Micro Matic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Commercial Beer Dispenser / Kegerator |
| Brand | Micro Matic |
| Model | MBB78-E |
| Dimensions (H x W x D) | 35.4 x 23.6 x 25.6 in (90 x 60 x 65 cm) |
| Weight | 132 lbs (60 kg) |
| Power Supply | 115V / 60Hz, 1.5A |
| Capacity | 1/2 barrel or 2 x 1/6 barrels |
| Temperature Range | 34°F to 45°F (1°C to 7°C) |
| Refrigerant Type | R290 (environmentally friendly) |
| Functions | Beer cooling, dispensing, adjustable thermostat |
| Installation | Freestanding, requires proper ventilation |
| Cleaning | Stainless steel interior, wipe with mild detergent |
| Maintenance | Regular condenser coil cleaning, door seal check |
| Safety Features | Automatic defrost, overload protection, child lock compatible |
| Spare Parts | Replacement gaskets, tap towers, CO2 regulators available |
| Repairability | Modular components, serviceable by certified technician |
| Compliance | ETL, NSF certified |
| Warranty | 1 year parts and labor |
| Draft Tower Height | 10 inches (25.4 cm) |
| Number of Taps | 1 (convertible to 2) |
| User Interface | Digital thermostat display |
Frequently Asked Questions - MBB78-E Micro Matic
What type of beer kegs fit the MBB78-E?
The MBB78-E accepts standard 1/2 barrel, 1/4 barrel, and 1/6 barrel kegs with a standard Sankey D coupler.
How do I set the temperature on the MBB78-E?
Use the digital thermostat on the front panel. Press the up/down arrows to set the desired temperature between 34°F and 45°F. The unit will cool to the set point automatically.
How often should I clean the MBB78-E?
Clean the interior and tap lines every 2 weeks with a mild detergent and sanitizer. Wipe the exterior with a damp cloth. Ensure the condenser coils are cleaned every 3 months.
The MBB78-E is not cooling properly. What should I check?
First, verify the power cord is plugged in and the circuit breaker is not tripped. Check that the temperature is set correctly. Ensure the condenser coils are clean and the unit has proper ventilation around it. If the issue persists, contact a service technician.
Can I use the MBB78-E for home brewing?
Yes, it is suitable for home brewing. It can dispense homebrew from corny kegs with a compatible coupler. Make sure to sanitize all equipment before use.
How do I install the beer tower on the MBB78-E?
The tower is pre-installed. If you need to replace it, access the mounting holes from inside the unit, secure the tower with screws, and connect the beer lines. Refer to the manual for detailed instructions.
What is the warranty period for the MBB78-E?
The MBB78-E comes with a 1-year warranty on parts and labor. Registration is required to activate the warranty.
How do I replace the door gasket on the MBB78-E?
To replace the gasket, remove the old one by pulling it out of the groove. Clean the groove, then press the new gasket firmly into place, starting from the top. Ensure a tight seal by closing the door.
Can I dispense both beer and soda from the MBB78-E?
The standard model is designed for beer only. With additional kits (e.g., carbonator and syrup pump), it can be modified for soda, but it is not recommended due to potential corrosion.
What CO2 pressure is recommended?
Typical CO2 pressure for beer is between 10-14 psi. Adjust according to the beer style and temperature. Use a dual-gauge regulator to monitor pressure.
User questions about MBB78-E Micro Matic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual MBB78-E - Micro Matic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MBB78-E by Micro Matic.
USER MANUAL MBB78-E Micro Matic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Micro Matic
Model : MBB78-E
Category : Uncategorized