SVTE50A4 - Water heater SVAN - Free user manual and instructions
Find the device manual for free SVTE50A4 SVAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater |
| Model | SVTE50A4 |
| Brand | SVAN |
| Capacity | 50 Liters |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 2000 W |
| Dimensions (H x W x D) | 85 cm x 45 cm x 45 cm |
| Weight | 18 kg |
| Water Connection | 1/2 inch BSP |
| Max Temperature | 75 °C |
| Pressure Rating | 8 bar |
| Energy Efficiency Class | B |
| Installation Type | Vertical Wall-Mounted |
| Control Type | Thermostatic with Dial |
| Insulation Material | Polyurethane Foam |
| Tank Material | Enameled Steel |
| Protection Features | Overheat Protection, Pressure Relief Valve, Anti-Corrosion Anode |
| Maintenance | Annual descaling and anode inspection |
| Spare Parts Availability | Heating element, thermostat, anode rod, and gaskets |
| Reparability Index | 8.9 / 10 |
Frequently Asked Questions - SVTE50A4 SVAN
How do I install the water heater?
Installation must be done by a qualified professional. Ensure the wall is sturdy enough to support the weight. Connect the water inlet (cold) and outlet (hot) with 1/2 inch fittings, and connect to a 220-240 V power supply with proper grounding. Safety: install a pressure relief valve.
What is the recommended temperature setting?
For normal use, set the thermostat to 60°C (140°F) to prevent legionella growth. Lower temperatures may save energy, but higher than 70°C increases scale buildup.
How often should I descale the water heater?
Descaling is recommended once a year, depending on water hardness. Use a descaling solution or vinegar, and follow the safety instructions. Flush the tank thoroughly after.
What should I do if no hot water comes out?
Check the power supply and circuit breaker. Ensure the thermostat is set correctly. If the heating element is faulty, replace it. Also check the trip switch or reset button.
How do I replace the anode rod?
The anode rod protects the tank from corrosion. Replace it every 2-5 years or when it is heavily corroded. Drain the tank, unscrew the old rod, and install a new one with PTFE tape. Refill and check for leaks.
Is the water heater safe to leave on overnight?
Yes, it is designed for continuous operation. The thermostat will maintain the set temperature. For safety, ensure the pressure relief valve is functioning and the tank is properly grounded.
What is the energy efficiency class?
The SVTE50A4 has an energy efficiency class of B. To save energy, set the temperature to 55°C, insulate pipes, and use a timer if possible.
Can I mount the heater horizontally?
No, this model is designed for vertical wall-mounting only. Horizontal installation may damage the heating element and void the warranty.
How long does it take to heat the full tank?
With a 2000W element and 50L capacity, it takes approximately 90 minutes to heat from 15°C to 60°C. Actual time depends on inlet temperature and tank condition.
What spare parts are available?
Common spare parts include the heating element, thermostat, anode rod, gaskets, and pressure relief valve. Purchase from authorized dealers or online stores.
User questions about SVTE50A4 SVAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual SVTE50A4 - SVAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SVTE50A4 by SVAN.
USER MANUAL SVTE50A4 SVAN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SVAN
Model : SVTE50A4
Category : Water heater