ST8000 - Water heater SVAN - Free user manual and instructions
Find the device manual for free ST8000 SVAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater |
| Model | ST8000 |
| Brand | SVAN |
| Capacity | 80 liters |
| Dimensions (H x W x D) | 800 x 420 x 420 mm |
| Weight | 25 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 2000 W |
| Energy Efficiency Class | C |
| Max Water Temperature | 75 °C |
| Heating Element Material | Copper |
| Insulation Type | Polyurethane foam |
| Safety Valve | Pressure relief valve included |
| Installation Type | Vertical wall mounted |
| Control Type | Thermostatic knob |
| Display | LED indicator |
| Anti-Corrosion | Magnesium anode rod |
| Maintenance | Annual descaling and anode check |
| Spare Parts Availability | Thermostat, heating element, anode rod |
| Warranty | 2 years |
Frequently Asked Questions - ST8000 SVAN
How do I install the SVAN ST8000 water heater?
Installation must be performed by a qualified professional. The unit should be mounted vertically on a solid wall, with the pressure relief valve connected to a drain. Ensure the power supply matches the rating plate.
What is the recommended temperature setting?
For optimal energy efficiency and to prevent scalding, set the thermostat to 60°C (140°F). This also helps reduce bacterial growth.
How often should I descale the heater?
Descaling is recommended every 6 to 12 months, depending on water hardness. Use a descaling solution or vinegar to remove limescale buildup.
Why is the water not heating?
Check the power supply, circuit breaker, and thermostat settings. If the heating element is faulty, it may need replacement.
What does the pressure relief valve do?
It releases excess pressure to prevent damage or explosion. Regularly test the valve by lifting the lever briefly; water should flow out.
How do I replace the magnesium anode rod?
Turn off power and water supply, drain the tank, unscrew the old anode, and install a new one. Check every 2 years to prevent corrosion.
Is the SVAN ST8000 energy efficient?
The unit has an energy efficiency class C. To save energy, lower the temperature setting and insulate the tank and pipes.
What should I do if the safety valve leaks?
A slight leak during heating is normal. If continuous, the valve may be faulty or the pressure too high. Consult a technician.
Can the heater be installed outdoors?
No, the unit is designed for indoor use only. Exposure to weather can damage electrical components.
How do I drain the water heater?
Turn off power, close the inlet valve, attach a hose to the drain valve, and open the valve and a hot water tap to allow drainage.
User questions about ST8000 SVAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual ST8000 - SVAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ST8000 by SVAN.
USER MANUAL ST8000 SVAN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SVAN
Model : ST8000
Category : Water heater