Popular SF260C - Range hood Cylinda - Free user manual and instructions

Product type	Range hood
Brand	Cylinda
Model	Popular SF260C
Installation type	Wall-mounted
Width	60 cm
Height	15 cm
Depth	50 cm
Net weight	12 kg
Power supply	220-240 V, 50 Hz
Maximum extraction rate	600 m³/h
Number of speeds	3
Noise level (max speed)	60 dB(A)
Lighting type	LED
Grease filter type	Aluminum mesh
Carbon filter included	Yes (optional recirculation)
Control type	Push buttons
Duct diameter	120 mm
Energy class	B
Annual energy consumption	60 kWh
Filter cleaning indicator	No
Safety features	Overheat protection, safety switch
Spare parts availability	Motor, filter, light, switch

Frequently Asked Questions - Popular SF260C Cylinda

How do I install the Cylinda Popular SF260C range hood?

Installation should be carried out by a qualified professional. Ensure the hood is mounted at the recommended height above the cooktop (typically 65-75 cm for electric hobs, 75-85 cm for gas). Secure the hood to the wall using the supplied brackets and connect the ducting or set it to recirculation mode.

How often should I clean the grease filter?

The aluminum mesh grease filter should be cleaned every 2-3 months or more frequently if used heavily. Clean it with warm soapy water or in the dishwasher at low temperature. Ensure it is completely dry before reinstalling.

How do I replace the carbon filter?

If using recirculation mode, replace the carbon filter every 4-6 months. Remove the grease filter, slide out the old carbon filter, and install a new one (model specific to Popular SF260C). Reattach the grease filter.

Why is my range hood making excessive noise?

Excessive noise may be due to a dirty filter, loose ducting, or an object inside the motor. Check and clean the filters, tighten duct connections, and remove any obstructions. If noise persists, contact service.

How do I replace the LED light?

Turn off power to the hood. Locate the light cover (usually under the hood), gently pry it open, and replace the LED module with a compatible one (4W, 12V). Ensure correct polarity and snap the cover back.

What is the maximum extraction rate of this hood?

The maximum extraction rate is 600 m³/h, suitable for kitchens up to 15-20 m². Use the highest speed for heavy cooking odors and steam.

Can I use the hood without ducting?

Yes, the Popular SF260C can be used in recirculation mode with a carbon filter. The air is filtered and returned to the kitchen. This requires installation of the carbon filter (sold separately).

How do I reset the filter cleaning indicator?

This model does not have a filter cleaning indicator. It is recommended to clean the grease filter regularly based on usage, approximately every 2-3 months.

What are the dimensions of the hood?

The hood is 60 cm wide, 50 cm deep, and 15 cm high. However, the exact dimensions can be found in the product manual. Ensure sufficient overhead space for installation.

Where can I purchase spare parts for this hood?

Spare parts such as filters, lights, motor, and switches can be purchased from authorized Cylinda service centers or online retailers. Use the model number Popular SF260C to ensure compatibility.

USER MANUAL Popular SF260C Cylinda

SPISFLÄKT POPULAR

COOKER HOOD POPULAR

SF250C, SF260C, SF270C

Cylinda

year after year

©

B Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.8

www.cylinda.se/service

Please read this installation and user guide carefully before installing and using the product, paying special attention to the safety instructions.

Keep the instructions for reference or for the next owner.

Disconnect the product from the power supply prior to cleaning or maintenance.

The diversion of exhaust air must be carried out in accordance with instructions issued by the appropriate authority. Exhaust air must not be directed into flues that are used for fumes from items such as gas, wood or oil-burning stoves or fireplaces. The distance between the stove and the product must be at least 42 cm. For gas hob, the distance should be increased to 65 cm. Adjust accordingly if the stove manufacturer recommends a higher mounting height. For safety reasons, the installation and replacement of cables or other types of connectors should only be carried out by a qualified professional.

You must not flambé food underneath the product. If the product is to be used at the same time as products that use energy sources other than electricity, i.e., gas hobs, gas, wood or oil-burning stoves or fireplaces, etc, the room must have an adequate supply of air. The product may be used by children from 8 years of age and persons with mental, sensory or physical impairment, or a lack of experience and knowledge, provided they are given information about how the product is to be used. Children should not be allowed to play with the product. Children must not undertake cleaning or maintenance of the product unsupervised. Accessible parts of the product may become hot when food is being prepared. A fire is more likely to spread if the product is not cleaned as frequently as indicated.

Attention!

The developer or proprietor is responsible for ensuring installation is carried out correctly and complies with the applicable building regulations.

GENERAL INFORMATION

The product features LED lighting (6.5 W), aluminium filters, an AC motor and the Easy Clean system.

FUNCTIONS

A

B Fig. 1

A. Fan speeds.

B. Lighting.

It is a good idea to turn on the fan before starting to cook, as this prevents cooking smells spreading into the room. Adjust the speed of the fan depending on the type of food you are preparing. If possible, allow the fan to run at a low speed for a few minutes after you've finished cooking. You may also wish to run the fan on the low setting when the oven is in use or after using the dishwasher.

CARE AND MAINTENANCE

Cleaning the filter

The cooker hood should be cleaned with a damp cloth and washing-up liquid. With normal usage, the filters must be cleaned at least every other month. Clean more often after intensive use.

Fig. 2

Remove the grease filter by opening the snap retainer, Fig. 2.

Handle the filter carefully, taking care not to bend it.

Soak the filter in a solution of warm water and washing-up liquid. The filter can also be washed in a dishwasher.

Refit the grease filter after cleaning, making sure it snaps firmly into place.

Cleaning other parts

The interior of the cooker hood and removable parts should be cleaned at least twice a year.

Fig. 3

Remove the bottom plate by pushing the snap retainers in the direction of the arrows. Fig. 3

Fig. 4

Release the blower by bending the snap retainer outwards in the direction of the arrow (1) and pushing the blower away from you and down (2), Fig. 4.

Fig. 5

Release the impeller by pulling in the direction of the arrow, Fig. 5

Clean the bottom plate, blower, and impeller using warm water and washing-up liquid. The blower and impeller can also be washed in a dishwasher. After washing and drying, assemble the parts in reverse order.

Fig. 6

Refit the impeller. Make sure that it is level in the groove on the motor.

Fig. 7

Refit the blower by inserting the supports in the rear of the fan (1). Bend up the blower (2). Fig. 7

Fig. 8

Make sure all the snap retainers fit onto the cooker hood lugs. Twist the blower (1) into the lugs (2). Press the blower's snap retainer back into the lug (3). Fig. 8

Attention!

Check that the parts snap firmly into place.

TROUBLESHOOTING

Check that the fuse is intact. Go through all the functions to check what is not working. Start by disconnecting the product from the power supply and switching it on again. Check that the connector is not bent or twisted at the connection point.

SERVICING

Fig. 9

Before contacting servicing, check the product label and note down the FUN number, S/N number, and manufacturing date of the product.

The product label is located on the left side, underneath the filter/bottom plate.

Contact Cylinda Service

tel. [phone] or visit:

www.cylinda.se/service

They can help you fix the problem or refer you to the nearest service agent for fast and effective service.

The product is covered by the relevant AP-PLiA provisions.

ENVIRONMENTAL INFORMATION

The main raw materials used in the product are:

• Metals: stainless sheet metal, galvanised sheet metal, zinc, aluminium
• Plastics: polypropylene, polyamide, polycarbonate, polybutylene terephthalate (PBT)
• Glass

All components comply with the RoHS Directive.

PACKAGING AND PRODUCT RECYCLING

The packaging should be deposited at your nearest recycling point.

The symbol means that the product must not be treated as household waste. It should instead be taken to a collection point for the recycling of electrical and electronic components. By ensuring that the product is dealt with in the correct manner, you are helping to prevent the adverse environmental and health effects that could arise if the product was disposed of as regular waste. For further information on recycling, contact your local authority or waste disposal service, or the store where you purchased your product.

ECO-DESIGN DIRECTIVE

The product has been tested in accordance with and meets the ecodesign requirements of European Regulation 66/2014.

ELECTRICAL INSTALLATION

ELECTRICAL INSTALLATION

ELECTRICAL INSTALLATION

Electrical connection for 230 V~ earthed.

The product is supplied with a cable and earthed plug for connection to an earthed socket. The socket should be accessible after installation is complete. The junction box or wall socket must be accessible after installation is complete. If the connector is damaged, it must be replaced with an equivalent special cable from the manufacturer or their service agent.

INSTALLATION

INSTALLATION

Service

We have service throughout Sweden / Nationwide service in Sweden

Visit www.cylinda.se / Visit www.cylinda.se

Call 0771-25 25 00 (local rate only) / Call 0771-25 25 00

Declare

Model code

Serial number

Purchase date

Problem description